Search results

I have just came across these, Merriway BH06852 (2 Pcs) Gate Hinges Heavy Duty Hook and Band Cranked Necked Black 350mm (14 Inch) - Pack of 2 Pieces https://amzn.eu/d/axHPGxX I have 2 questions, how would I secure it so a thief can’t or find it hard to remove, and how strong is the metal, I got...

I did have access to fibreglass, but really wanted a clear as possible roof. I plan to upgrade the roof sometime in the next couple of years to 6mm acrylic clear sheets. So didn’t want to spend too much on clear pic corrugated sheets especially as I can brace them, although I can’t seem to find...

Makes perfect sense now thank you for clarifying this for me. When I go through the last box of 1000 staples I will order more, but what should or could I do with loads of small sections?

Hello So I have a small shed/workshop area, that has all ready got guttering installed. The back slope end will run off into the gutter, and all of this has been worked out. I have brought light pvc clear corrugated sheets, that I do need to cut some off, what is the best way to do so? Next...

Hello So, I am building a new workshop/shed/work area. Anyway, it will mostly only hold a moveable workbench with a table saw inside and a mitre saw. When I need more room, I plan to have the bench roll outside where I will have 8x12ft area to work in, if I need more space, I can then roll the...

The spring is still there, looks like nothing is wrong with it, but the spring is not as springy as it should, so, the pressure to keep the smaller staple sticks aligned correctly isn’t enough to use on multiple small sticks so it twists to the point it has no staple ready to fire. This issue...

Hello sorry for the confusion about to follow. my staple gun/nail gun, which I have kind of “broken” the spring has lost strength and needing to keep the magazine full allows it to work perfectly. So, due to this, some of the staple and nail sticks are smaller than a full stick. so, as the...

That is what I am after, just 900mm really…

Sorry, I know what I want or need, but getting that from my head, into English, is not easy as if I don’t know what something is called or if something makes more sense to myself, I will call it that then when communicating it to other people most treat me as being hostile, but I am honestly...

It doesn’t have to be square perfectly, just enough to work out everything roughly, I can then use that with my trusted square to align everything. because I can’t find what I am after with out overspending, I am just going to make a jig when time comes… if I get a strip of wood, I can just...

I think it was Toolstation, I have seen a work light that you can move around and attach it to a wall, or ceiling, or just placed on the floor. This is what I would use for lighting if any was ever needed as my area is a sun hotspot.

That’s kind of what I am doing now… but the combination squares that I am after has a groove inside the ruler allowing the depth set to be square.

Hello Sorry… I don’t know about you guys but I am super confused with this whole post… I am after one of these WORKPRO Combination Square 12Inch/300mm, Engineers Set Square, Stainless Steel Angle Ruler, Adjustable Carpentry Square 45/90 Degree with Bubble Level, Measuring Tool for Engineer...

Yeah, I do mean inches… So I kind of need a 30inch or a 76.2cm or 762mm I am happy for anything bigger, but storage might get difficult after 45 inches or about 115cm

you guys are amazing... they are all great, and I will get myself one of these too... but I am after... https://www.toolstation.com/bahco-combination-square/p36432 Eerh, yeah, I just need the ruler bit really, but allows the bits to slide down/up... to mark say 10mm line for screw placements...

Hello what are the largest as in longest combination square that is available to diy people, not trade or commercial only. I am after a combination square that is at least 30” long, something that is affordable but no longer than 45” ideally but happy to longer if prices are good.

Okay, sorry my communication skills are not great. so, think of a grid, say tic tac toe, the boards normally meet up at the post/timber… they are then screwed in place… well my boards don’t line up at the timber as it would need for plasterboard, so, the ends of the boards meet up in the...

Okay, so at the back of our house, there is a socket that is on the RCD, when we had our kitchen redone to allow my wheelchair access, they moved the oven but kept the socket, this is now just a on/off switch socket. this is a still all connected up, we just have security lights up now. i have...

Hello i am really sorry… I do struggle with all forms of communication. I have asked my mum who said just get a extension lead already made, 13amp should be good but could get a 16amp, she also said that it is a while until I am going to need power, so forget all of that for now, concentrate...

I hate the screw fixing team by me… if you can guess who I am talking about… they told me 0.75mm was sufficient… I always go bigger than what they say, or come here… I think they also said 2 core… they also told me that I need a pro to change a blade of a circular saw and we had to send it...