Search results

Many thanks john i have passed the message to Young Graduate! Regards will slow charge help the battery come alive?

Car bmw 116i E87 / 55k miles manual petrol 2005/06 Car does under 3k miles a year regular service after not driven for over a week started this morning in within A minute he got the following on the dashboard: the combination of lights indicate an electronics failure Attachec are the images...

Thanks all model is hp office jet pro 6830 there is printhead clean prog on printer but with the error"there is problem with printhead" it would not let me do anything! Cartridges are genuine hp ones the printhead is separate assembley not part of cartridge googling the model does have...

I need to remove printhead assembley from the printer and clean the same is it ok to use nail polish remover Acetone free with ingredients Ethyl Acetate,Isopropenol,Aqua,bitrex Thanking in advance Ih

My brother needs to replace his rental property mira excel shower ( i think exposed valve) supplied by combi boiler! Is mira element exposed valve thermostatic mixer shower 1.1910.001 right straight forward replacement Or advise if any other in this budget which is easy replacement thanking in...

Thanks! Will do that ! Keeping the car as she done 30k in 10 years! There is an american video how to replace kia soul Battery it is bit involved but i think i will manage(borrow long extension from neighbour) Thanks for all your help Regards Ih

Many thanks John! I just checked the original is 410cca! With your experience kindly advise My best option! ( yesterday was the second time she left lights On when she went for her teaching job) On retun after 7/8 hours !there was no start up! Also this is original battery done 10 years! Regards Ih

Hi Need to replace my oh kia soul car battery car is 2010 model soul 1.6 petrol search comes up with S3 063 And S4 063 i think they are both 44ah and 440cca! Will it be ok to replace with S5 063 which is 52ah and 520cca ! ( No two websites have same measurement on these battery how confusing )...

Sucess! Managed to open the programmer and yes there is the third wire in slot one which is hw off i also Understand about having ch without hw! Final kindly confirm the 3 port valve is behaving as it should do i.e. Staying on mid position if i have understood correctly then i think that is what...

Thanks! I have 3 wires in cy stat! I need to learn how to check the wire in prog & report back!

Ian my bad not following instructions correctly! But am good and meter read as per your initial help! If possible just to enlighten my knowledge on 3 port valve will appreciate your help!as mentioned earlier I have st6400c programmer the switch on the valve stays mid position when hw or ch or...

your stat couldnt be easier to check, demand for HW at programmer, and you should get live voltage at C at stat, with stat turned up demanding heat you should have live at terminal 1 with the stat turned right down no demand for heat , you should get live at terminal two and nothing at terminal...

Hi ian just to say many thanks for all the help! It did take me some time as had to be yoyo as all In loft apart from boiler! My oh will not help as she thinks i will wet/burn the house! But successfully Used the meter with ur instructions and found with no demand 4 heat i donot get live @T2...

Hi i think ian is busy! Any help to close this if cy stat is faulty i can replace Thanking in advance Ih

I hope i have done it right! The valve motor stays on auto side it did not motor across but the boiler kicked In and radiators are getting hot!

Hi again i did as advised fyi the boiler is not responding to cylinder stat i.e. turning off/ on it is staying on Servicing hw demand ! Ian di we conclude faulty cy stat?? Thanks 4 your help

Many thanks again will have a go also kindly confirm if room stat down and i put the cy stat right up should The boiler kick in??? Regards ih

Ian thanks for response but being retired is no excuse but am poor with multi meter can do it only If there is a video! Lol!

Hi my system is potterton profile boiler + hw cylinder with l641A1039 cylinder thermostat and Y plan valve +st6400C programmer past few days i suspected water was very hot decided to check stat ( i turned down room stat) i cannot hear any clicks on turning cy stat right down or right up? Does...

Hi! 1930 built house semi with squeaking stair case currently carpeted ( i know this has to come off to do repairs) 13 steps in total there is meter cupboard underneath and the stairs are boarded with t&g and the toilet next to it toilet is tiled inside so no access to underneath the stairs in...