Search results

Press chime then 0 …

FFS ….if he can’t get it working on a short bit of cable to a video input …then what’s the chance he can sort it via the IP route …which has many other sidelines / settings to sort

Where do you live ?

What devices do you have ?

Don’t think so maybe the 030 version or possibly the dummy version with a sounder inside

I take it you didn’t bother to read all the thread ? It’s allready been said and it looks like the poster has allready bodged up a lead to connect it !

Problem is …. They did 4 versions Prima 100 no cut off Prima 200 no cut off Prima 300 ….with cut off Prima 500….with cut off ….normally green LEDS Plus a Prima 030 ….single LED ( so it’s not that one ) I would wait till midday then power it down mains and battery and see if the sounder cuts...

Post picture of bellbox …. We may be able to tell if it has a cut off timer

That makes no sense …how is a more modern ip camera more likely to work on a modern Tv

Ok from what I can see the output is standard PAL composite output , to be honest this is an ip camera it looks a good spec …but it may need resetting …whybthe video out isn’t working is ? Bad connections at your end …software issues in the camera or it’s faulty anybody’s guess , try to connect...

Post picture of the label on the camera …

Looks like an older CEF challenger brand

Go into engineer mode Option 20 Time and date from engineer mode Option 51

Use ext3 and plug it into this port …

Bnc 5m lead plus a bnc to phono ….then either scart adaptor or plug straight into composite port ( if your tv has one ) normally a yellow phono input , then use tv external input button …

It could also be one of 3/4 other formats via a bnc …NOT SUPPORTED by a standard tv video inputs

Post picture of it ….

Pull fuse out , disconnect battery …short the two pins with screwdriver keep it shorted push the fuse back in , keep it shorted for 10 seconds, it should be 1234

Yes it only resets the code I take it you have tried entering the default engineer code ? Post picture of control panel is there a fuse isolator at the side of it

Screwdriver blade …