Search results

I would be looking at the psu ….it may be ok unplugged with no load …but no good with a load on it ….probably the cheapest option

Texecom premier or pyronix euro 76 …

Could have purchased a complete new bellbox for not much more …I have known the Honeywell AG6 bellbox bleep,if the nicad is flat ! You could try disconnecting the piezo sounder and leave it powered up for a few days to charge , then see if it bleeps

how much was the bellbox battery ….

That’s the glove ….stuck to the hot glass …see pattern on glass / glove ….you need to remove that off the glass

More capacity..

Unfortunately most mains pirs are rubbish these days . I only fit GJD lighting systems now but most people don’t want to pay the price

Be fine …as long as it will fit size wise ..they are made up of flat button cells , 5 in 6v version 6 in a 7.2 and 7 in a 8.4 ….each being 1.2v they are only about 3mm extra per cell What bell box is it ?

Ask ring …

It’s not a sounder output ! looking at your device ….its an output to link to a sounder unit that needs batteries to make that unit ring

Probably because that sounder requires batteries to work …it’s not just a sounder / speaker ….

What’s coming out of the battery leads ? It’s pointless putting in a new battery if the panel charging output is faulty

Nvm can be reset ….if you want to risk it ….

Bellbox battery will have no interaction with that panel Either back up battery is no good ….and it’s not burnt out the charging resistor….it should show 13.8 ….not 12.2 ….remove battery and check voltage coming out of battery leads …

Tap …..is dead in the water …

What panel ? What firmware ? Press menu 4

It’s programmed wrong ? Wrong zone types used ?

I would try a fibreglass ladder or steps before you buy ! I am not keen as they don’t seem as sturdy as aluminium ladders/ steps I’ve got a pair of both same brand and height ….the metal ones any day ….

I’ve had one where it had lost its SSID …It was coming up with something different spoke to tech support they couldn’t sort it , posted on the texecom toolbox and got the correct info ..think it was showing AP-HUB …and the password was something like 12345678

What are you putting in as the password ?