Search results

Thanks for reply,Can't get there till next week, how do I post a pic? Not sure what you mean by twist. They are 6x3 Diamond trellis, will be fixed on 3x2 posts fixed to brick wall,with approx 18 " above wall level. Thanks

Hi I'm about to fix 4 lattice trellis panels to an 8 metre long boundary wall ,the trellis to be approx 18 inches higher than the 5' wall.No problem except that the wall and yard slopes away and is probably 18" to 2' lower at one end. It will be fixed to uprights 3x2. Do I fit the trellis so it...

Yes,thanks done that but my query was regarding the pulse tones I hear when picking up on the fixed phones.Please read the original post.

Thanks, no one line only

Anyone?

I have a patio and paths around the rear of the house, approx. 50 square metres of indian stone flags in various sizes. After power washing over several years the pointing mortar is has now almost completely gone. I would like to use a jointing compound used wet, but the depth of the joints is...

Cuprinol Shed and fence protector,natural look. Repels water and easy to apply. No contest!

Only a separate simple system on the internal garage doors.

Hi, I have a Cigaset C620 base with answer phone and 2 additional handsets. Also 2 old "wired" phones in a bedroom and garage. The line is supplied by Virgin cable.The original "overhead" BT cable appears to have been cut where it enters a box in an upstairs room. When picking up an incoming...

Thanks,impressive! Switch is tucked away in the corner of a porch so appearance is unimportant. Simple mechanical or the Greenbrook would do. Any advice please on how to wire. Existing switch has brown connected to both terminals and a blue (joined with crimp connector)in the box ,not connected...

Thanks, both terminals have brown live connected.There is a blue neutral passing through the box ,been joined with a crimp connector. The Screwfix switch may not fit,the surface box is hard against the return wall

There is a blue neutral passing through the box but not connected.Both terminals have brown live connected.Just need to time to come on at 17.00 and off at 23.00

I have a surface mounted single gang switch which switches 5 sofit mounted downlighters at the front of the house.The switch is in the porch.I'd like to replace the switch with a timer. Can anybody please suggest a timer switch which is easy to wire.Is it a simple wiring job? Thanks

I have a surface mounted single gang switch which switches 5 sofit mounted downlighters at the front of the house.The switch is in the porch.I'd like to replace the switch with a timer. Can anybody please suggest a timer switch which is easy to wire.Is it a simple wiring job? Thanks

Thanks to all, 17 years ain't bad. I've scrapped it

No

The suppressor looks ok. I've refitted it and started a wash cycle. The machine stops with a bang, tripping the RCD at a point at the end of the cold pre-rinse stage. So pump or heater? Not sure when the heater activates.

I've replaced the filter, restored mains and it didn't trip. It now turns and fills but I've switched it off before it reached the point at which it "blew" So I suspect the filter is ok and probably the fault is in the heater or pump? It had started to rinse when it tripped.

Thanks John I presumed it wouldn't work at all with the suppressor removed?