Search results

Thanks. Just curious are all wireless receivers wired to a boiler in a similar way or does it vary depending on the brand?

Bear with me on this one. Astra J 2013 1.6 petrol. I seem to have a judder from the clutch only when pulling away in 1st gear only from standstill. Any ideas what is at fault here. Clutch seems to still have a lot of life left in it. Looking around could possibly be contamination on the...

I have a basic existing 'Danfoss' wireless system and am looking to self instal my V3+ kit to my Ideal Logic C33 combi boiler. The current receiver is already connected to the boiler. To make life easier for myself Can I leave the wired in part into the boiler in place and just connect the new...

Hi all I hope you can help My Yale IA-210 alarm has developed a fault where it would beep randomly( no pattern) every few minutes and all the arm/part arm/disarm buttons illuminate green amber red at the same time. Oddly I cannot seem to find any logs of any faults. There was a very brief 'AC...

Hi. Ok so noted the display. Just revisiting for more help please. Status is hot water & CH/ pre heat off. Just switched CH on using the wireless timer and the CH comes on nicley even though the setting is for HW only. Can upload a couple pics from my phone if I can just find out how to..

Is there an easy way to detect pipes behind a tiled wall in a bathroom? I need to install a shower rail and there has not been one there before Thank you

Will have to wait until it happens again. If there is an actual temperature display what are your thoughts? Or are you thinking along lines of a fault code? Thanks

Quick update guys the diverter valve theory may be out as that heating pipe does not heat up when the hot water was turned on. The heating came in again in the night when no hot water was being used and the boiler is on hot water ONLY. Any other ideas what can at fault please? Thanks

Hi all Looking for some help for my Hotpoint SH53XS fan oven. Basically we turn the oven on ready to cook then after a few minutes or cuts out like it seems to getting too hot and a safety cut out kicks in. When this happens the unit cuts off completely until it cools down. The fan comes on so I...

Ok thank you

Looking for ways to correct a problem where it seems normal emulsion has been used in our bathroom where it bubbles when someone is having a hot shower. It's only a small bathroom and we use an open window for ventilation but additional ventilation is being addressed. Any help with how I need...

Thank you so much for your help. Diverter valve sounds about right. Will monitor it when the hot water is next on and post back Thanks

Hi all Hope someone can help. Our CH comes on randomly even though the boiler is set to hot water only. Its run by a wireless Danfoss electronic timer - could this be activating the CH to come on even though the boiler is not set for CH to come on? Its an Ideal C30 boiler if that helps Thanks...

I should have mentioned that it only does this mid cook - does this still sound like the case?

Hi all. Hope someone can help My Hotpoint SH 53 XS built in fan oven ofren cuts out as it overheats then if left for a period of time switches back on again. When this happens the cooker completely shuts off including the timer/clock My first thought is the thermostat at fault but there is also...

Thanks for confirming Dan

Hi all Just wanted to run this past you lot first before I sign up to anything I am looking to have a new combi boiler fitted shortly. Its basically a like for like installation replacement in the same location. I already have a DT90E thermostat control wired in downstairs. As part of the quote...

Many thanks. To be honest I would have thought the boiler would not work at all if it was one of the pcb's? We had a heating engineer out on home insurance. He mentioned there are 4 pcb's on this boiler but could not say which one was at fault Regarding the pressure reducing valve are they...

Hi all bit of a strange one for you! Just on the verge of ordering a new combi boiler to replace the old Vaillant WCW242 after it was diagnosed with pcb board issues and it just cuts out when the hot water is put on full pressure Anyway, just realized that if I put the hot water on just on...

How do I best explain? When I flush the downstairs toilet I get a loud groan/vibration until the fill stops. If I turn the tap on next to it it goes away. Seems like the fault is in the cistern somewhere but can anyone help with what might be at fault and how difficult it would be to DIY...