Search results

Looks like i'm just gonna use speaker brackets now.. but what i meant was: A section of shelf mount at 45deg across the corner.. speaker is sat on the middle of that, facing into the room at 45deg, so flush with the shelf front edge.. then make the part of the shelf underneath the speaker...

I'm mulling some fittings for a couple of bookshelf speakers in the rear corners.. have a nice bit of pine i was going to make corner shelves with.. then thought it'd be handy to scribe the footprint of the speakers and make that section tilt. Where can i get a fitting for that and what would...

Just bought the trestle 2-pack but it only comes with 2 clips, enough for one trestle. Anyone know where another set can be sourced?

Hellfire & Damnation. I have used them in the way you suggest before Foxhole but had hoped a simple adaptor might be an option. Thanks for the info all ..

Cant seem to find them.. aren't there holders/adaptors that will allow you to use your sds drill bits with a non-sds cordless?

The lower device is clearly a flux capacitor.

Good shout thanks, got a 2500mm alu feather edge for around £24 del'd.

Can anyone point me towards a reasonable and cheap 8ft guide rail for sawing/routing? Doesn't need any special features just work properly as a guide..

Anyone know will Travis Perkins mill timber you bring in, and what they might charge?

Holy mother of God but google images take the biscuit for longest chuffin links in the world..

Grabbed that set off ebay, thanks again :)

Perfect, thank you :)

Not having much luck finding adaptors.. i just want to be able to use socket fittings 1/4" or 1/2" with my drills.. can anyone point me in the direction of an adaptor to use them like that?

No need to tool it and sounds a good size for cladding, just lap them one slightly above the other..

I basically want something like that which can be stuck on.. as i obviously don't want to be drilling the modem :)

The adhesive part is just to fix it to the cable modem, which is very light.. i'm looking for a metal fixing i can attach to it so i can wall mount.. of the type you wall mount most things with.. sitting on the floor atm, messy.

That table's gorgeous.. what was the cost of sleepers, and is it just joined with biscuits?

Can anyone point me in the direction of some stick-on fittings common to wall mounts with room for a screw head and vertical slot above that to drop into. I want to put my Virgin cable box out of the way but it has no mounts of its own. I'm assuming the fittings i describe can be found with...

Didnt think i still had it but yeah, mine has the made in Sweden stamp

Wondered if you'd comment lol. I was gutted having heard so much about them.. had you used them before you bought that one? Think these are all copies, or just using cheaper steel now?