I'm mulling some fittings for a couple of bookshelf speakers in the rear corners.. have a nice bit of pine i was going to make corner shelves with.. then thought it'd be handy to scribe the footprint of the speakers and make that section tilt. Where can i get a fitting for that and what would it be called? ideally just screw it on underneath across the fixed and moving sections..
Gimball hinges/fittings?
- Thread starter kaseryn
- Start date
Sponsored Links
Looks like i'm just gonna use speaker brackets now.. but what i meant was:
A section of shelf mount at 45deg across the corner.. speaker is sat on the middle of that, facing into the room at 45deg, so flush with the shelf front edge.. then make the part of the shelf underneath the speaker itself able to swivel backwards and forwards.. to facilitate tilt in desired direction.
A section of shelf mount at 45deg across the corner.. speaker is sat on the middle of that, facing into the room at 45deg, so flush with the shelf front edge.. then make the part of the shelf underneath the speaker itself able to swivel backwards and forwards.. to facilitate tilt in desired direction.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
