Search results

sorry, dont know enough terms, basically a 6ft high 10 panel fence(80ft) with full height concrete supportsat each join of the panels ________________________________ Lynda, moderator please note forum rule 9

any ideas on how much a fence should cost to replace. 80ft approx, had a quote of £1000

thank thermo, good suggestion, i will ask masona, what do you mean by claim it via the solicitor?

thanks for reply thermo, concrete supports are on my side, does this make it my fence as it looks like it was erected from my side of the property/

cheers Masona, ever heard of the suggestion that the back of the fence is the one you have to look after, cheers

hi guys, i have looked at other topics and they have been helpful. the dividing fence has been blown down, posts are on my side, not marked on deeds although previous owner marked fence on right as ours and fence on left as neighbours responsibility. neighbour says the convention is with a...

I have searched indesit on the forum and found a few similar topics, and asking for the fault/flashing light etc. my query is, as this machine is 3 years old is it worth spending at least £70/80 plus parts on a callout when I can replace it for around the £300 mark. any suggestions for a decent...

just for reference for anybody else, i ended up giving a 3rd coat with the roller but didnt roll over the edges that were cut in and to my relief it has worked a treat.

thanks a million for all replys, will painting a final coat but using a brush and not including the edges match it up

thanks, im not sure i fully understand the term cutting in, also what can i now do to rectify, and if i am doing the same again(painting on to paper, what should i do differently

thanks for your reply. basically is there more paper at the edges so I should have used a thinner paint in those areas?

just the edges of the wall, ie a painted square and then finish withe the roller

Hi, I have been painting a room and decided to paint over the wallpaper which has worked out fine. one problem is the edges, brush painted under the coving, above the skirting along the sides and filled in with a roller, but am left with the edges noticeable after 2 coats, is there anything i...

thank for reply, its 6ft off the ground cistern, is the seal round the valve to the cistern base inside or out of the cistern, sorry I need this in idiot terminology

Hi. i have a chain flush cistern, water keeps running in to the bowl even though the tank seems to have filled up, I have checked the flush goes back fully, is it a problem inside the cistern, thanks for any help