Search results

hi:) My 80's dormer is built into a slope, RH side of the house is exposed from top to bottom, LH side the ground slopes up above the ground floor (pic below is from when we bought the house). IMG_20170611_190000013_HDR by Tirglas_7 posted 2 Sep 2018 at 2:07 PM This window floor level on path...

Wow, that is brilliant. Many thanks for the detailed write up, I'll be doing it like that for definite :)

great many thanks, i don't have the door yet, was hoping to get the lining in then plasterboard up to it. so a better method is to do the lining and the door all together? can you go into a little more detail on that method? i take it i cut the hinges into the door jamb, then assemble all...

hi foxhole, i understand i need to cut it down. Can't figure how the distance between the rebates for a 686 door though, dow i just add 43mm on to 686mm? or is there another method? many thanks

hi:) i want to install a door lining to accept a 686mm door, unfotunatley the only lining i could get today was a 762 with the rebates pre cut. measuring the rebates for the 762 outer edge to outer edge comes in at 805mm, so should i add 43 on to 686 and this will give me the right spacing? or...

Yes it's the programming the smartkey to aux I'm having trouble with. I'll have another search of the forum as couldn't find anything on how to actually do it. Edit: sorted it, for anyone else that may struggle to find it. once you learn the smartkey via the control panel, select number 2...

hi:) does anyone know in what order/length of time etc the buttons on a smartkey need to be pressed in order to control PC Control 1. i have a relay wired in to control a garage door, i can open/close the door via wintex and then connect app so i'm confident that side of it is working. going...

managed to get that working in the app. I've had the app setup before when i first installed the panel, 2 keypads, a few pirs etc (renovating my house and system only half installed atm), it was buggy then and i see it unfortunately hasn't improved :-/ to get my wife to use the garage door as...

Nice one, thanks for the info

bit of an update in case anybody in the future is trying to do the same the relay above works a treat, in the end i couldn't get output 1 working so switched to the digicom output 1, set that to PC Control 1 with the pulse attribute selected as advised, adjusted the pulse timing to 1 sec and...