Search results

  1. con1_uk

    Remove old olive from radiator fitting

    Hi, just turned off the mains water and drained down the damaged pipe with a hose as it wasn’t planned.
  2. con1_uk

    Remove old olive from radiator fitting

    I thought the header tank was to refill the rads if needed?
  3. con1_uk

    Remove old olive from radiator fitting

    Thanks for your help today. Will my system work without the header tank for a while until I get a new connector tomorrow please?
  4. con1_uk

    Remove old olive from radiator fitting

    It was coming over the lip of the top tank like the ball cock wasn't working the ball cocktails moves fine by hand but the water sprays upwards so I think it was hitting the lid and coming over the side. I notice now also the isolation screw leaks badly but wasn't before (see 2nd picture) It...
  5. con1_uk

    Remove old olive from radiator fitting

    Done that thanks. Turned the mains water on and it Dont leak from there anymore, result. But the green tank upstairs has water coming out the top of I now....help
  6. con1_uk

    Remove old olive from radiator fitting

    Here you go. Thanks for your help so far
  7. con1_uk

    Remove old olive from radiator fitting

    Ahh sounds like a plan. Once removed do I just fit the new white fitting? Do I need another metal ring or will the new fitting have everything needed?
  8. con1_uk

    Remove old olive from radiator fitting

    There's an olive on it and a metal insert
  9. con1_uk

    Remove old olive from radiator fitting

    Rad started leaking so I removed it but in the process I damaged one of the plastic elbow push fit jobbies. I have done an emergency drain down so there is nothing spewing out of it anymore. I now need to fit my new elbow but can't use the original fitting as the thread don't seem the same. How...
  10. con1_uk

    Gaps under skirting board

    Hi, my floor is concrete, house was built in 1995
  11. con1_uk

    Gaps under skirting board

    Hi, We had our old laminate floor removed and replaced with LVT, the new floor is somewhat thinner than the old wood laminate which has left gaps under the skirting boards which is causing a draft in the kitchen. What’s the best method here please? I can probably remove them and lower them...
  12. con1_uk

    Draughty window

    Hi, any help please folks
  13. con1_uk

    Draughty window

    Hiya, My double glazing window don't seem to close properly, there is a gap when closed, is this fixable please? The window is in my garage conversion and opens fully as it's an escape window.
  14. con1_uk

    Internal door separating house from conservatory

    Hi, I know we should have external doors between the house and the conservatory but at the time we went for internal bi folds which during the winter months let a lot of droughts in. Are there any good solid internal bi-folds or similar solutions to alleviate this issue please? Or do I just...
  15. con1_uk

    CH not coming on all the time

    Hi, our house has a quite old classic LX system boiler with a separate HW tank, the CH is set to come on in the morning for just an hour of so and does but during the day if it’s cold or I haven’t lit the wood burner I turn the thermostat up but it don’t always come on, I boosted the HW the...
  16. con1_uk

    Lean to between two houses

    Hiya, I have a side ginnel (alley for some of you) between me and next door, is a lean to a good idea? I don’t think I will be able to fix to the house next door so will have to install 3x3 wood near to their wall with some guttering, just going to be for storage and fire wood as I have a wood...
  17. con1_uk

    Heating and hot water on at the same time

    Ahh I get you sorry, so far I have had the hot water on on its own then on with the heating (different day) and both wasn’t much more than just the heating.
  18. con1_uk

    Heating and hot water on at the same time

    Hi, sorry, not sure what you mean?
  19. con1_uk

    Heating and hot water on at the same time

    Hi, been tracking my usage of gas and experimenting with how long to have the hot water on etc, one thing I noticed was the usage didn’t go up that much when I had the heating on at the same time as the hot water, is this right? Is my theory correct? I have an Ideal standard fx with a hot water...
Back
Top