Search results

  1. M

    Water ingress, possible penetrating damp?

    Hi, Here's a photo of the wet patch from in the bedroom. The wall on the right is the gable end (plaster over brickwork), the wall section above the cupboard door is plasterboard. This is the loft directly above the corner of the bedroom, with the insulation rolled up. Here's a view of the...
  2. M

    Water ingress, possible penetrating damp?

    Hello, I wonder if anyone can help advise me about what the likely cause of my problem is and suggest some next steps. During a recent night of strong wind and rain, I noticed a small damp patch in the corner of our bedroom. A small damp area in the about the size of a £2 coin, with a few...
  3. M

    Pitched window hard to close

    Hello, I had two Dakea-brand pitched roof windows installed last summer. One of them is getting fairly hard to close. Normally you should be able to pull it shut quite easily and turn the handle to lock it, but recently it needs quite a bit of force to pull it shut. Looking at the window and...
  4. M

    Diagnosing CH pressure loss

    Hi, I moved into a new home around 5 months ago. One issue we had to deal with early on was the CH rapidly losing pressure and lots of air filling the system - the combi boiler was old and had sprung a leak, so it was replaced with a new combi. However, I've noticed that it seems we still have...
  5. M

    Improving insulation of fitted wardrobes

    Yes, I understand what insulation does, thanks. My hope is that increasing the insulation at the fitted wardrobes results in less heat escaping from the bedroom/wardrobes and out into the loft. If I go ahead and try this I can test it out on one section of wardrobe first to see if it helps -...
  6. M

    Improving insulation of fitted wardrobes

    Hi Ken, Thanks for the reply. That sounds like a better idea, I'll try that. However, one thing I forgot to mention is that the fitted wardrobes on one side of the room back on to a different loft cavity, which is much smaller and harder to access. It's a small crawl space compared to the...
  7. M

    Leak from boiler/CH losing pressure

    Hello, I moved house recently and one issue that I noticed after a week or so was lots of trapped air in the CH. Two or three upstairs radiators had about 1/2 to 1/3 of the top feel cold. The system also had too little pressure to force this air out when bleeding the radiators (the boiler read...
  8. M

    Improving insulation of fitted wardrobes

    Hi, The master bedroom in my new home is chilly compared to other rooms, for various reasons. One might be that there are several fitted wardrobes which back on to (cold!) loft voids - these are even colder than the main room. For that reason I want to improve the insulation of the wardrobes -...
  9. DSC_0014

    DSC_0014

  10. DSC_0015

    DSC_0015

  11. Wardrobe/loft insulation

    Wardrobe/loft insulation

    Inside/outside of fitted wardrobes
  12. M

    New surface needed before laying vinyl?

    Thanks for your advice guys. I'll put down plywood before anything else.
  13. M

    Adjusting toilet inlet pipe

    I was just being thick. I saw the screw and once I'd assumed it had something to do with fixing things in place there'd be no way I'd click what it was really for :roll: I've never done any plumbing apart from putting in the new toilet. Don't have any experience fitting copper pipes, or any...
  14. M

    New surface needed before laying vinyl?

    Replying to my own thread... Reading up on this on the net, it seems to me that it should be okay to put tiles down onto the chipboard but first the chipboard should be prepared "with a suitable primer". Is that right, and if so what would be a suitable primer?
  15. M

    Adjusting toilet inlet pipe

    Thanks gents for your feedback. I guess you're both saying that to sort it properly it should be plumbed in copper - not something I should try myself, don't have the tools or know-how so I should get a proper grown up to do it instead! The piping was installed by the previous owner, and...
  16. M

    Adjusting toilet inlet pipe

    Uh, no. This really isn't.
  17. M

    New surface needed before laying vinyl?

    Hi there, I'm wanting to have the floor in the bathroom re-laid, as the vinyl that is there is getting pretty manky and wasn't put down very well by the previous owners in the first place. I'm thinking of putting down some self-adhesive vinyl tiles, and I'm looking for some advice so that I...
  18. Untitled

    Untitled

  19. Bathroom flooring

    Bathroom flooring

  20. M

    Adjusting toilet inlet pipe

    Hi there, A while ago I replaced our toilet as the old one was broken. Unfortunately, the pipe for the water inlet was fixed to suit the size and layout of the old toilet, and as such it's too long for the new toilet. This means that if the pipe is just left to lie naturally, there will be a...
Back
Top