Search results

ok thanks all, unfortunately the stat can't be moved due to the existing wiring etc With regard to the installer mode on the thermostat do I need to do anything on here or leave it all to default?

Do I need to change any of the parameters in installer mode on the thermostat? or can I just leave it all as default? It is located in the hallway, and there is no TRV on the radiator nearby On the boiler the central heating temp control is set to number 6

Hi Yes I just set it to 23.5 just to get the room heat up quickly so I could see if the thermostat would reflect the change in temp so that I could see that it's working Yes I set the parameters by using the arrows to select the room temp 23.5 which flashes and then reverts back to the...

Hi I have just installed a Honeywell DT90E thermostat today to work alongside my Worcester Bosch Greenstar 30CDi and a Plumb Centre heating controls. All wired in correctly, but when setting the temp to say 23.5 the actual room temp is displaying 20 without any changes to this temp when...

Hi Ok thanks - I am not against CWI but I have read so many horror stories about it and speaking with an architect friend recently he also said that filling the cavity is not advisable, especially in South Wales because of all the rain we have. Anyway so the best CWI on the market is...

The company and installation team should have advised us that this could be an issue if installed against an external wall In my mind the goods are not of satisfactory quality as per the sales of goods act If you were going to complain what would you say, that the wardrobes have a design...

Ok thanks So the wardrobe needs better ventilation? Would you say this is a design flaw of the wardrobes? As for £2k wardrobes I don't think I should have to resort to cutting holes in it after 6 months

Rendered brick

Thanks so would you rule out having cavity wall insulation and go for the exterior wall insulation which would be better as there is still the cavity in place? What is the cost of the exterior type insulation for an average 4 bed detached house? The reason I was looking at the cavity wall...

Thanks What about if I insulated the back wall of the wardrobes with the polystyrene type insulation? which would keep it warmer and result in less condensation forming on the back mdf wall of the wardrobe Or would this just cause condensation on the exterior wall?

Hi I live in a 1960's built house with a cavity wall. I was thinking about having cavity wall insulation until I spoke with some building surveyors who did not recommend having it done as the point of the cavity especially in westerly areas which is where I am (Swansea, Wales) was to help...

So solid fully backed carcusses are not that great then? Fitted wardrobes should have ventilation holes in the unit? Also is it recommended that the backs should be 18mm MDF as I am not sure that the Nolte one is they are really thin backs, could this also cause the problem

Hi It's Lauren here.. We have had our Nolte Fitted wardrobes for about 6 months now and I just noticed today that on the join at the back of the wardrobe there is black mould growing. (I cant access the actual wall because the wardrobes are so large but there might be mould on there as...

Ok thanks will do if this is the case what's the solution ? Many thanks

Hi If it was a problem with the filters then it would happen everytime the shower is turned on, but this only happens after the bath has been filled and then you try and use the shower. That's right after the bath run, say about 5 mins later I tried the shower to wash the childrens hair...

Hi I don't think so When I run the bath taps the pump doesnt come on, only when the shower is on

Sorry about the long post but I hope some experienced plumbers will be able to help me out with identifying the problem please Thanks Lauren Our Bristan shower (which is over the bath) combined with a varispeed 50 water pump has started to play up. What happens is when we run a bath (for...

Hi We currently have a Plumb Centre analogue thermostat http://www.plumbcenter.co.uk/en/heating/domestic-controls-valves/center-room-thermostat-analogue-230-v-16395 and have just purchased a Honeywell DT90E to replace it with. How will the wiring work as the plumb centre one we...

A digital thermostat I require but a wired one not wireless. I am looking for a quality product so should I be looking at the Honeywell DT90E - what has put me off this is the loud clicking people report when its turning itself on and off. Are there any other wired digital thermostats I...

ok thanks Any suggestions?