Search results

Thanks Neo i will start there first Tony

It is installed in a Rolls Royce Silver Shadow 2 Tony

Thanks Mattylad

I installed one of those digital tv ,cd, radio players in my car .When im parked up with the engine off i can watch tv and listen to the radio with no interference but when i start the engine up the tv picture distorts and the radio signal weakens . Any ideas ? Tony

Im thinking of buying the pro-wizard painting system. The main reason for buying it is the claim about not having to fill up your roller every minute with paint ,as with the pro wizard you can hold a large amount of paint in the roller and away you go. I normally use rollers and been doing...

Hi Do you have to be an oftec tec ? To carry out any work on your own appliances .I want to decommision my own oil tank which is empty and my argar . As we all now live in a world that demands a certificate to wipe your own ars.... I thought i would try and find out Thanks Tony

Just thought i would add my bit on this? I have a house in France . The electrics were worrying to say the least No earth cable from mains consumer unit No earth cable on plugs sockets Some Power sockets were wired into the lighting circuit The best one was after shutting down...

Thanks Richard You are quite right im sure my old man with help mixing.I guess i will lose a couple of stone in sweat,and ask the nhs to grow me a new arm Thanks Tony

Thanks roughcaster Im plastering a house out and im not looking forward to doing the down stairs ceiling its about 50 sqm .Im doing it own my own in August and it will hot ,as the house is france. I dont usually bother my self with any retarders but i just thought it might be an idea to...

Hi Does anyone now if there is a retarder on the market for gypsum plaster to slow down the setting time. I no we all used to pee in it back in the day but i dont think that will go down that well on site. Tony

Thanks For the reply . The cable is 1.5mm ,single core,in 20mm plastic conduit exactly 4m long .radial, with a load of 2800 watts not sure on the fuse rating as stated can be 10/16 amp.and the voltage is 220 My problem is that because i dont know what the maximum load capacity this...

Hi thanks for the advice. the thermostat is 16a so i assume thats a max load of 3520 .Which means the thermostat will not be suitable ,for that load . As you are so helpful on this site i thought i would ask another question . Is there a maxium load in watts for 1.5mm and 2.5mm ...

Hi to you all Im planning on installing electric under floor heating in my house .The total load is 4800 watts as the three mats will work off one controller. what size cable and fuse would suit this installation. ps im aware of part p etc... Thank for any help...

thanks gasright that website is very helpful Thanks

Part 2 is open book .You would need to have some memort to read the viper book and remmber it . The problem i found was that a lot of questions were not in the book. Unless you can tell me otherwise,he are some that i remmbered where do you site the hearth notice. cooler plate should...

Hi ive passed the practical .I had two exams for theory ccn1 ive passed the first one ,but failed the second . There was no training leading up to the exam ,appart from the college work which hasnt touch the questions in the exam , We were told to read the viper book for our studying???

Hi to you all... Ive just taken my ccn1 305 part 2 paper :oops: yesterday and failed???????? What a headache 2 hour exam 60 questions .I manage to get 40 questions right but not enough for a pass. Does anyone know were i can get some study aids to help me through the pain ,,,,,, Thanks

Does any one know what the mix is for parging ,plastering internal chimney? thanks

Does anyone know what the first control should be from a water meter ,down stream ? before the stop cock in the house? Some layouts say drain value ,some say stop cock ,and some say service value? thanks

Thanks for your advice ........