Search results

What and where is the pump impeller, is this situated outside at the boiler?

What do you mean by sealed and sludged system? if the pump was obstructed surely no rads would heat.

I have an oil central heating system in a two storey house, the system can be used to heat water only and heat water and the rads, but this past week whenever the heating is on only a few rads heat up, i have switched the room stat up to full and the temperature on top of the boiler to 90 but...

I have a Sony DVD recorder/ player with a 500Gb HDD, i have a Voltek CCTV camera connected to the scart socket on the back of the recorder, but im looking to buy a DVD player / recorder with a HDD that has Freeview HD built into it, but none of the ones i have looked at will let me connect the...

Boilerman2 some photos. _

There are two pipes going to the boiler, not sure if this matters but the system has a motorized valve fitted to it, i will post some photos tomorrow.

I have been thinking about taking advantage of the new boiler scheme grant and am looking at replacing my existing oil boiler with a new condenser boiler, my current boiler is outside in a little boiler house, if i was to go ahead with replacing the boiler would there need to be any work done...

:lol: :lol:

We have a long mirror fitted to a wooden surround it had to be removed from the wall for some painting to be done, but i cannot get it back onto the screws which are fitted to the wall, the fitting on the back of the mirror / wooden surround are keyhole fittings, is there a knack to doing this?

You dont live my wife, she tells everyone who comes into our house about the sill, so to mention replacing the stained sill is a no no as this sill would be different to the other sills in the room and that would never do dear would it, the plant is also a no no as i would be wearing it for...

I was removing some old paint from above a window and unnoticed to me some of the paint stripper dropped onto the PVC window sill, now the sill has a few orangy, yellow stains on it Anyone offer any advice on how i can make the stains less noticeable?

I thought that :? :?

I normally do all my own decorating but due to work load i cannot get the time to redecorate the kitchen, so i had a local decorator to call earlier and give me a quote, he informed me that he normally uses crown solo gloss paint on all the white woodwork that had previously been painted, so...

Thanks Hugh. Yea i was going to use some PTFE tape, so the proper name for the brass bits are tails. :)

I have a few radiators from our oil central heating system that are going to get powder coated. But the guy who is doing the job wants the brass bits that come out of the bottom of the radiator and screw into the valve from the copper pipes removed, is this okay to do and is it only a large...

Looking for some fixings for a drylined wall to support a metal curtain pole and curtains, which are quite light in weight. What do you recommend?

Would this stuff do? http://www.polycell.co.uk/products/polycell_quick_set_cement_polyfilla.jsp

ceramic

what cement based adhesive would you recommend?

Silicon is too thick, i need something that will run down the back of the tile on the wall, tile only comes out from the wall about 3mm. would grout mixed up watery work?