Search results

Have unplugged it and left at room temperature for 36 hours and powered back up. There was no water in the evaporator tray. Its been on now for 30 hours and the the temperature in the fridge is still above normal even though its set on 5 and the fan is still on all the time. The compressor...

Thanks for that I will post back what happened

I have a plug in power meter and of course the the power would be unplugged before touching the thermostat. Ive been repairing stuff for 45 years but obviously not one of these.

I should just add that I have measured the power consumption and the compressor only comes on occasionally for short period. My first thought was the thermostat but why is the fan on constantly. I think its only supposed to come on with the compressor. Does anyone know where the thermostat is...

Thanks for your reply. No it has been put back in the original position away from heaters and hot air.

I have a 5 year old Lec TF5586W fridge freezer and the fan is on constantly and the temp in the fridge only goes down to about 10C even when turned up full but it freezes OK. This condition was noticed after it had been moved into the other room and back after a new kitchen was fitted. I can do...

Ok thanks, I googled and found this one which would seem to be the most basic. http://www.discountedheating.co.uk/shop/acatalog/Honeywell_24_Hour_Programmable_Room_Thermostat_CM901.html

At the moment the mechanical clock is set to the always on position and the boiler is turned on using the wall stat. Are these wired programme stats just connected into the wall stat without having to remove the boiler cover i.e. in parallel with the wall stat switch. Ive been googling but I...

Many thanks for your reply. I hadn't thought of a wired/wireless prog stat. Have you any in mind? Any views on why the mechanical clock keeps going a few hours out. There haven't been any power cuts, is it a common fault with these. Im wondering if the clock can be repaired or replaced easier...

My Mothers boiler seems to work OK apart from the mechanical clock which has started malfunctioning. I set the correct time and when I look at it a few days later it can be a few hours out. Its 5 years old, any suggestions on DIY.

I have a Tricity Bendix AW1201 and for the second time in 3 years its not getting up to temperature. I had the heater/thermostat replaced and I think its gone again. Does anyone know how to put it into diagnostic and the fault codes. I saw the service engineer do this when he came by rotating...