Search results

is it only the local council I need to speak to ? do i need to separate the land? will it be three titles at the Land registry instead of one title?

My 3 bed semi detached Buy to Let property built on very large corner plot plot, see attached. I am thinking of building 3 extra units; one on plot 1 and 2 unites on plot 2 (one bed room flat on each story) . where do i start?

no, it is the opposite side

Chris, many thanks for the speedy reply, yes it is the same one.

Alpha 240E diverter valve leaks only when there is a demand for DHW. do we need to replace the whole valve or just the front part of it (DHW flow valve)

the opening (Sash) of our composite door does not sit properly in side the frame when the door is close resulting in draft coming from outside. particularly at the right hand bottom corner. the sash is out of the frame by 2-4 mm and that is where the draft is coming, see attached pic. I had a...

just unplugged everything and the braker reset, plugged everything back again and is it is working. but can not understand why.

do i need to test every section of the circuits and try to find which piece of wire is faulty and replace it?

but nothing has been added to the circuit recently it everything has been working ok for ages.

I have this tester and know how to use it if someone let me know what to test.

no, none of them are outside

this is the one that is not working

32 amp RCD in one of the power circuits at home does not stay on i.e. not working even if all the sockets are off. I have just replaced it with another working one and still the same. Then I replaced it with a normal 32 amp MCB and this one is working. this gives me the indication that there is...

thanks Chris, no nothing. and it is not dripping noise it is rumbling noise but is goes and comes.

Alph 240E making very strange noise even when it is switched of from the mains. when it happens last week, the pressure was low, so I filled up and the noise disappear. the pressure now is at one and there is no demand for DHW or CH the noise stared again and it stays even when I switch it off...

understood yes it does. but there is another 6mm cable coming out of the wall plate that used to feed the cooker. And this what i am using to feed both the oven and the DHW element as it is long enough and will be in-between the 2 appliances for convenience

many thanks for the speedy reply Tayler. yes i mean RCBO and it does have testing button. the 6mm wire that is coming out of the 45amp wall plate is connected to the feed side of the switch with 13amp fuse. and 2.5mm flexi wire is connected from the load side of the switch to the DHW element...

have 6mm wire that used to feed my old cooker in the old kitchen that has become a utility room now. this was connected to 32 RCD at the CU. the cooker has been removed and i am using the circuit to feed the immersing element of DHW cylinder via 2.5mm flexi wire. the immersing element is 3kw and...

please ignore posted in the wrong category

n