Search results

The pull cord light in my bathroom make a loud click when pulled, can you get silent or quite pull cords. If yes, what make ?

Thanks for the advise. Pressure should be ok, as the first time someone uses the tap in the kitchen, they and the floor ends up getting wet. The mains pipe comes up in the middle of the house, so could not be upgraded. I take it that qualified plumber (CITB, IoPHE, etc) would check the...

I'm thinking of getting a direct unvented cylinder, are there any makes to avoid / recommend. There are 4 of us in the household, so I will be getting two showers fitted and a bath . What size would you suggest ? I was thinking 210 liter. Thanks

1) I have just fitted 3 hinges and now my door opens by it's self. Any way how to tell which hinge(s) is causing the problem and how to fix it. 2) Is there a standard / recommend hight for a lever door handle ? 3) I guess the centre of the handle should be in the centre of stile (left to...

Now chipboard is dry, it's 1mm thicker. decided to over board with 6mm ply. Is it best to glue & screw ? If the tiles I use are say 10mm, will 4mm of adhesive be ok. Thanks.

I have put 2" * 2" bit of chipboard I used, under water for 13 hours and I can not pull it apart. i'll see what happens when it dries out.

Big-all, I was going to use polished chrome ball bearing hinges (grade 7) from screwfix on my oak venered doors, will they be ok. Thanks

Why is chipboard the worst thing to tile on. (except carpet) I was advised my by local builkder merchant, that tiling onto chipborad in a bathroom was ok, so I installed 22mm P5, which I can not take up. The max thickness I can have including tiles, adhesive, ply / backerboard etc is 20mm...

Option 2, it is. 9mm ply has been used to line all the walls in all rooms, with plasteboard over the top. Had to do this as the trusses were designed for max room. Many thanks Steve

Following a loft conversation I now need to install the bath against 3 walls and with a shower over the bath. Stud walls are lined with 9mm plywood, for strength only. Having read other posts I will, tile floor first, and fix plasterboard over ply. Is it best to: 1) tile the walls...

Hello, I was thinking of getting a bath with an air spa. Has anyone used / own one? Are they worth getting ? Thanks

Just downloaded the evaluation version, seems simple to use (I know nothing about music). only wish it was less than £100. Thanks

Just what I wanted, fixes to issues I had. 1) graph title. 2) getting filename and / or tab name in a cell. Many thanks

I,m creating a graph and need the a/the title to be created from the tab name or filename. Can this be done? I know this can be done in the header, but it's only visable when printing.

i'm looking for some software, where you can write your own sheet music by drag and drop the indivdual notes. I can't find any on the internet.

Thanks for quick reply. I'm doing this for the inlaws and they live over 100 miles away. If I were to lay the slab on Sat, would it be ok lay the scree the same day / sunday or do I have to for the slab to dry. Thanks again

I'm replacing a porch floor as it had sunk and cracked after 40 years (2" cement on clay). I have dug out about 12" below the floor level, put put in 6" hardcore. Will it be ok to put in 6" of screed (1:4) or would be be better to put in a 4" slab and then 2" screed. There was no dpc and...

How should you title round an external corner e.g. window, as most of the tiles I have seen do not have the edges glazed. I do not want to use the plastic corner strips. thanks