Search results

So ive run into abit of a problem its been fine till it's got cold and I needed to get the Christmas Decks down now the boards are packed tight and I can't get some of them back down again. Any advice? I'm thinking I need to cut the pieces shorter, which are touching the outer wall??

Thanks didn't know you could do that

Still got this problem. Radiator is not coming on if there's an overnight frost. We've been in the loft and can see some of the pipes but there's no room to work. Insulation is too big to go around the pipe any ideas?

It's took me a while to get it done. It definitely brightens up the small space.

Thing is on the front of my garage I've bunged up a 1-2" gap that runs all along the garage door, well I've left a gap in the middle to let air in and out plus we've a hole in the brick which was used for the old tumble dryer.

So ive almost finished this now but have a few more questions. So do I need to cut the boarding shorter so it's not touching the wall (single skin outside wall) which we've had mould growing on? I've painted the boarding and added an anti mould additive as well. The wall I'm talking about in...

Plug & socket are behind the machine

Hi all, today we woke up went to put a wash on so flicked the switch and nothing, no lights, panic set in as I last used it sunday with no issues. Take the door off and remove the plinth I lifted the machine a tiny bit and then we had flashing lights,now it's all good working fine? (well it's...

Thanks I'm going topps today. Other option would be to stick it back on and try and conceal the crack

I don't suppose anyone knows where I can get another pack of these tiles?

We've bought the same ideal standard taps but with a shower attachment. Upon taking off the panel it's quite tight behind. Am I going to be able to change the tap? Is it just going to be a case of using an adjustable spanner and loosening the 2 joints. Also what tools would be best...

Well believe it or not the trellis is made out of wood & we'd like it close to the top.

Hi I'm looking for the best way to attach trellis to the existing fence. I've done a little search but most vids just show what to do with the fence posts being higher.

Yes I was hoping to add a new screw and maybe silicone round the bits to stop it rusting. I'm worried about damaging the tiles. Thank you I'll try some mole grips and heat the screw using my soldering iron. Wait do I heat the screw first? I'm worried the screws going to sheer off.

Hi our showers slide bar has just jumped off the wall The bottom part is all rusted and I've a horrible feeling this is the remains of the screw stuck in the plug in the wall. Any idea on how I can get the screw out? I've tried pliers but it's not budging

I don't mind cutting round them just makes the job alot easier if the diagonal pieces weren't there. Yes the boards are going to be screwed down. Add timber to sister joist? Theres only going to be Christmas Dec's up there nothing heavy maybe the ladders.

Looking at boarding the garage out to help with storage and possibly adding insulation later on. My question is can I remove the diagonal piece of wood? So It makes it easier to lay the boarding? Also what do people do when it comes to filling in the joists? How do you fill the small gaps?

Did you remove the diagonal boards?

There finally coming round today to fix the issue I'll give it a week before it's dropped again.

I've looked at a few strips but don't they have to be screwed into the door? I don't fancy doing that as no doubt the company will say it invalidates my warranty. I've been looking at maybe trying to adjust the hinges from what I can gather there Trojan hinges and you take out the 3 middle hexs...