Search results

Pics below of router.

Was thinking of drilling holes through my router and using these holes where arrows are for screwing through.

Did you attach a erbauer to the same table as mine. All the holes don't match us or even one hole if I use it and drill another two, it'll be of center. Amy.pics of yours?.

No, not on this router. Maybe that's where it attaches on another type router but not this. I was hoping it would though. Should I use these holes?

So is it a case of trying to line this up centre as best as possible and drill new holes through the router base and through the plate countersunk and good to go. What if it's slightly of center by a slight of a mm, will this matter?

Yes, that's the one! If I drill holes in this to accommodate my own router, what about adjusting it up and down. Will this still be easy enough to do

I have a trend router table and a erbauer router which won't fit. Anyone know if I can adjust it anyway to make it fit. It's saying online that the table is TREND ROUTER TABLE COMPATIBILITY Trend: T5 / T5 MK2 / T9 / T10 (240v Only) / T11 (240v Only) Bosch: GOF 1600 A / 1700 ACE CMT: CMT 1E /...

Any pics of it?

Need to work out the materials needed for it wether to put them in or not. See pic. Im thinking the live feed will come of the outside light so when the outside led light comes on, all the strip LEDs will come off it too. I was also thinking of installing some small sq lights built into the...

Outdoor

Looking for recommendations for strip lighting for some planter walls, a stone round seating area and around a paved step. I'm wanting the strip lights to be able to change colors.

Can the MDF be stile and rile thou?

New batteries in it.

I don't know if this is in the correct section of the forum but thought I'd ask anyway Incase it is. I've had a rotary laser level for a few years and two years ago it got wet and the bleeper stopped working but the arrows that find the level still worked. I hadn't used it in over a year and...

Can high tuff be run underground? I thought it was always armored cable only underground

Not to fussed about another light switch. I'm happy enough just for them to come on when the other light comes on. Would buying a small duct and high duff not be more than the armoured cable?

Just looking some guidance for some strip led lights for outside. I'll be tiling this area 14x6m with a white planter wall on one side and stone radius seating area. The wall and seating area is 6m away from the house. I also meant the strip lights at the step of the house. I can take a 1.5...

Is it possible to use MDF for stile and rail doors with thin ply in the centre. I've been finding it very difficult to source joinry grade oak or pine where I live. I tried using pine from the local builders yard but the timber isn't that good. Lots of knots and small twists. I have all...

New 14x6m extension going into a 2400sq ft house. The house is heated by a wood burning stove and oil with plastic pipes branch system. In this new extension I'm thinking of a manifold for the rads instead of fittings under the floor. Is it just a case of tee off the heating flow and...

Yes, unfortunately it might have been running for 4 years on the jets. The alarm has only been going off recently though. Why's this I'm wondering. It was a brand new appliance! He was a gas engineer as far as I knew. Now though I'm not to sure if he was. He was recommended by a friend...