Search results

Hi.. No didn't tighten first, should I ? And I did use a screwdriver. I'm using the Rawlplug anchors and tool..

Just 15mm I presumed? It's a partition in a new build... It's dry, it's 4 years old

Hole seems fine and the grips are in the plasterboard.. it seems to start tightening them pops and spins

I'm using a hollow Wall anchor with setting tool.. but some of the bolts just spin when screwing in? It's driving me mad.. any ideas?

Says zone 1 is bedroom.. but no sensors in bedrooms.. only : Door contact Utility Kitchen Living room Landing

I can't get my head around this.. Two different cables go into Zone 1 green and blue.. then white and yellow appear to be joined..? I've tried doing that at the contact and it says fault still

If I take the cables out of zone one, will this at least allow me to set the alarm for the time being untill I can resolve this? Looking at the cables on the picture.. I'm not home. It looks like the 2 cables in Zone one come from different sleeves.. ?

I pulled the contact and dislodged the other cable before I remembered to take a picture :-( I'll get back in the panel and trace zone 1 wires back. Thanks for your help with this !

Does this help guys?

So I've tried every combination of twisting the wires together, and all I get when I try to set the alarm is "Program 1 Set" ? All I've done is take the wires out of the contact.. seems strange unless I'm missing something and there is a loop?

Just a quick question.. so I join the two that where in the contactor and the rest should be left separated?

Thank you Secureiam I'll have a look tonight, thank you for your advice

Sorry that picture was before I twisted them together.. She isn't happy now as we font have an alarm.. ha ha I'm in the dog house!

I've done that but now get a fault Any idea.. for some reason it says the living room aswell ‍♂️

Thanks John

Hi Bonni, I've been told 20% min.. and some even 50% ?

Hi all, I have a smallish room just plastered a few weeks ago so I'm painting it tomorrow night. I would like to mist coat and do the top layer all tomorrow.. Can I do that ? I was thinking of doing the first section cutting in and rolling the mist coat, then starting the next.. hopefully...

Morning all, I need to extend the door contact as the front door is being moved forward due to an extension. The door won't be moved for a few weeks, but I need to pull the cables now and 2nd fix later on. Does anyone know how to disable the door zone for the time being on the above system ...

Only pictures and ornaments...so where would you put the wood exactly?

Could I use kitchen cabinet brackets? And gripits ?