Search results

Indeed i guess not, i have a core set and im not even a plumber. In my line of work if i didn't have the tool id factor it into my business for future customers. I drilled out waste and capped off 22mm feeds in about 30mins. Do the rest tomorrow morn i guess hour max. 400 saved from chancer.

So i pinged a local plumber via checkatrade (cowboys with a tick) seemed to have good reviews. Gave him a small list of easy jobs. Basically 4 jobs including terminating the 22mm feed to bath in floor (All chased out by my me for easy access to solder or fit compression). Soldering some 15mm...

UN Refugee Convention states that refugees cannot be penalised for entering the country illegally to claim asylum if they are “coming directly from a territory where their life or freedom was threatened” provided they “present themselves without delay to the authorities and show good cause for...

Oh dear anyway none of them should be allowed to arrive here illegally by boats no matter their colour race religion. Just saying!

This time of year we have a fck load of acorns and leaves in our garden. Ive built a similar contraption to below using a Billy Goat Leaf Vac which i will tow by my sit on mower. I need the below ducting i have ringed in red to hook it up to my mower. Basically a flange style plastic square to...

Diversity here you are. No we were never allowed to oppose or complain as the racist hater card pops out straight away. Integration isn't working. Unless we treat people under the same law and the same way for fear of being called racist we are doomed.

I have basin feed to run down wall was going to chase in channel for hot/cold and run out on hep elbows and then dryline over this face with drywall moisture resistant board. Shall i lag the pipes with foam lagging?

Rishi gone that is good news. Lizz wins that is bad news.

Hi i am surprised we don't have a dedicated Solar Panel forum here, anyone point me to a decent one? I am looking at having a system installed and want to discuss what i may need ie best panels inverters etc thanks.

Ok just to clarify here the plan would be to retrospectively apply planning we weren't going to 'oops' it completely. I was just wondering for example if we go retrospective they going to get ****ty that we weren't prepared to wait 3 months because they're so slow and just build it with these...

We have planning for an extension and rebuild of existing garage. Nothing is noted on the existing garage dimensions only height of pitched roof over garage @ 4.6m we are looking at building it 1 metre wider than the current footprint and raise overall height to 5m. Our small house sits in the...

We are having a new garage built. Builders have recommended using Block n Beam. Its over a clay foundations im wondering if this is better also due to heave. MY concern is they spec this right are the beams or blocks larger for garage the garage floor, also the span or floor area is is 6.5m x...

This week our neighbor had some brickwork laid for the start of their extension. I noticed the footings were laid were slightly uneven one end. Anyway they laid the first two courses of blocks without seemingly correcting the level by adjusting the first course onto the footings/foundations. The...

I currently have a hikvision Bullet cam running off a cat6 feed using poe on about an 80 metre run. However I want to extend my WiFi mesh to the same area and splice into this and split into two connections. As I don't have power there of course j can't do it via a hub /switch. My questions...

Hi please help me! I'm still yet to find something decent with regards to dimming and led. I'm not sure if it's the bulbs and dimmers or both. I purchased a relatively cheap Led compatible dimmer from screwfix plus dimmable bulbs from elsewhere. With dimmer right up the bulbs pulse bright to...

I am planning on adding a long feed of power to my summer house at the end of the garden some 250metres from the incoming feed to our house. Am i ok running the SWA cable along the perimeter on the surface? The perimeter consists mainly of posts and barb wire laden with various shrubs etc, it is...

Im looking at buying a new sit on mower for jobs. I currently have a Lawnflite RC125 and it's just not man enough, belts wear quickly as does the blade. Have a budget of about 2.5k normally cutting about 2 acres any advice welcome! Ive read John Deers are a bit overpriced for what they are, or...

Ive seen you argue with many people on here always from same point of being unquestionably correct. You missed the formulae i used to produce these percentages. Im not wasting my spare time on a bigoted fool explaining.

Oh dear somebody has their knickers in a twist :D its just stats and figures they are correct i assure you i was merely attempting to quantify and not use anything for any argument here chill.

Well my calcs from the data showed Third dose vaccinated 490 = 0.007% of the total vaccinated 50-59 year olds with 3 Jabs Unvaccinated 525 = 0.038% of total unvaccinated 50-59 year olds So less than .5 a percent of people unvaccinated are in hospital. Which is still pretty low. Anyone care to...