Search results

Hi jj4091, it looks like it is the element. I disconnected it and the dryer ran for a full 90 minute cycle. Back to the supplier on flea bay I think? Thanks a lot for your assistance guys, very much appreciated!

Hi, the RCD on the consumer unit trips after around 10 to 15 minutes after the dryer has started. Once it trips and I reset the RCD and trying to start the machine again it trips instantly. Hi, I've checked all of the cabling for rodent damage and there appears to be none. I did think I may...

Hi everyone Got an old Bosch dryer in our shed which was tripping the main split RCD in our 10yr old consumer unit. The element was knackered so I replaced it for a new one which worked perfectly for around 15 mins. It's just tripped the RCD again and continues to do so immediately after I try...

Cheers mate.

Thanks Alarm Engineer. I know it's not advisable but can the programming of the Elite 24 be done through the keypad, as £40 for the USB COM cable is a **** take! TIA.

Cheers Handymanjo

Hi Alarm Engineer Can I use my SD1 with a Texecom Premier Elite 24 panel, instead of using their own add on Com2400 digimodem card? Cheers, Gary.

Excellent stuff! I think I may go for the Euro 46 and flog my SD1 as they're going for £50 odd quid, second hand! Cheers Alarm Engineer.

Thanks Alarm Engineer Just been looking at the Euro 46 and this looks better than the Euro Mini. I currently have an SD1+ Speech Dialler connected to my G4. Can this be used on the Euro Mini? Cheers.

Hi again everyone Just about to press go on ordering a Euro Mini Proximity Kit to replace my crappy Accenta G4 and I have one question. Does this panel come with the option of sending a text or calling a number in the event of an alarm condition? If not, can an add on card be purchased to do...

Thanks guys. This is to replace my home alarm which is a Honeywell G4 which I fitted myself around seven years ago. I've been having some teething problems with it recently and I have an opportunity to get the Risco alarm system at cost price from a friend and fit it myself. Just wanted to know...

Hi guys Anyone have any views on the above alarm system? Cheers.

Hi handymanjo Fault has always been a blown F2 fuse on control panel, taking out the 12v supply for the PIRs. I've systematically been disconnecting each PIR to see if I can identify where the fault is originating from. I'm now down to my last 2 PIRs, hall and living room. It's been ok for...

hi guys I've been having some very intermittent faults with my Accenta G4 (previously discussed on here) & I found one of my alarm cables has been pressed near flat by a badly refitted floorboard. It goes to the hall PIR. The system has been working ok for the last 3 weeks or so, but the fault...

Brilliant. Thanks sparkymarka!

Thanks sparkymarka. so, would this panel bundle do the same with the supplied modem? http://www.onlinesecurityproducts.co.uk/euro46/pyronix-euro-46-range-10-46-zones-inc-lcd-rkp.html I'm leaning towards the Euro Mini 46 as this comes with the prox reader and tags. As ever, thankyou.

Hi guys Just about to order the following panel bundle below. http://www.cctvcentral.co.uk/texecom-premier-elite-48-kit-kit-0008-1098-p.asp It comes with a Com2400 Communicator. Is this the same as an autodialler, as in, when alarm is triggered it phones a pre determined number to alert you...

Thanks sparkymarka, appreciate the advice. On a side note, I've just found the install leaflet for my PIRs and I have 2 EOL connections on all my PIRs. Does this mean they have the resistors built in? (Pic enclosed)