Search results

Oh CAT 6 cable is ok yes - infrastructure stuff on a role is stiffer which you will have to terminate as well.

After the recent firmware upgrade, I now have a problem connecting the Smartcom back up again. Ive tried all sorts: the guidence is to disable Arc1 protocol - reset Smartcom pressing reset 5 times until the lights flash, then keeping my finger on the reset until the WIFI light starts to flash...

I have (or had as i've moved recently and have to refit them here) but i've got my Hikvision 4 MP cameras going to a POE switch to power them and then to a NAS - I went a bit over the top as i'm using it as a backup for photos and files as well and raided as well, this one is a 4 bay NAS and 16...

lol sounds good

you're absolutely blooming right!!! its ok and heartbeat has lit now

OK thank you I will connect to it again and see what happens thank you.

Hi there sorry the last panel has now gone back with the CIE error so that is out of the equasion. This panel is the replacement - being new I thought i would upgrade the firmware. This panel is dead by the looks when applying the power - Ive checked the fuses. Holding default when powering on...

Thanks for your reply, this is the process I did, I wonder if something has caught or something gone wrong during the flash process, as there is now nothing on the board. So back to tech support, i've only just replaced it for a CIE error and as it was new wanted to upgrade the firmware. They...

Despite following what it says in the PDF ie power down the panel - disconnect all from the comm ports When flashing via the port (pin1 in the right orientation) it failed to flash and the panel deadish - The power was applied once the USB Jac001 was in place and set to prog. with no power on...

Ohh yes and you can arm/disarm it with your smartphone along with keyfob etc.

Hiya depending how confident you are in fitting one yourself, I've fitted my own Texecom Premier Elite which is wireless (and works in a matrix so it gets feedback cuts down on false alarms) which is pretty good and lots of functionality and good documentation, can be programmed from a pc (once...

Or assign it a more suitable range :)

Networks hey:) check your router is on the same subnet ie starts with 192.168.1.XX If thats the case, I'm not sure they do DHCP assignments anyway regardless - it can pick up another IP address at any stage (depending on the router lease time which this might have done) so you need to assign it...

Ok thanks, yes its set up to receive the config I backed up the config this time but had to go around resetting the PIR's but hey all done and working fine :)

Flashed to V.3 and updated, ricochet had to be refound again but generally straight forward.

indeed, if it was that important they should make it more plainer, at least the software check, anyway's love the Texecom its been great,reliable wireless matrix. never had a false alarm from it and lots of options and even more now :)

Thanks very much for your help the other night, the retailer is exchanging the PCB so all's well that ends well :) V.3 here we come - minus any connections what so ever ha! and thanks to the electrical company they have been great.

The network data indicators (bottom left side of panel) both are not lit. (I cant remember if they was anyway, no PIR's are hard wired ) currently connected is the bell connections and the remote pad

Network LED's (bottom left side) nothing

RF LEDS ? (Left) green is static - ON and (Right) red is flashing on and of Ricochet network light is flashing red, in beats of 3? Heartbeat LED is off