Search results

ChrisFrost - Thanks again. Just one more question - I assume the line driver has to be located at the PC end of the cable run?

OK - what make is it. Do you also have an oil boiler - how is all this configured?

OK - Not definitely decided on type of boiler, but it was the issue of also using an oil boiler that I am interested in. Both types need an accumulation tank anyway dont they.

Thabks that is rely useful. Do you have an example of a reasonable line driver amp. The VGA cable will be about 5m

Gasification. Yes there is a big price difference but also a lot of efficiency difference. However it will be convenient to also have an oil boiler for when the biomass cannot be lit.

I want to install a biomass boiler outside but also have an oil boiler in side for when we don't want to light the biomass boiler. I also wan to use radiators as well as under floor heating but be ale to turn the radiator circuit off when not required. I realise this needs a plumber to install...

I want to put a floor box in that will allow a laptop to connect to a TV at the other end of the room that will act as a monitor. I want picture and sound and be able to cater for a variety of laptops. My intention is to run HDMI cable but was also considering a VGA cable. However I believe...

I am putting in cables in my barn conversion for TV distribution. I am running satellite cable to a distribution box to where the Freesat/SKy box will be. I am also running Cat 5 - in case it is needed and a phone line. However what cables should I run to the TV. Is it only HDMI, or should I...

What is the best way to fix plastic JG pipes to foam insulation - both with and without pipe insulation?

Not easy to get to the lowest point - I would need to lay new pipe. I will try trace heating and see if that improves things. Would a pump not help?

The heating oil supply to the boiler and the Aga is slowing and preventing the boiler from staying alight because of the cold weather. Is there a pump I can fit that will prevent this happening? Or any other method such as the tape that keeps the pipe warm Thanks

A bit of both. I was going to have separate boxes in most and remote control to one box in a couple of key rooms, maybe sky multi room in these key rooms.

I wish to distribute TV (Sky and Sky + and/or Freesat, and CCTV to a maximum of 8 TVs.). I have a 8 way LNB and was thing of using the Labgear distribution boxes, so running the 8 co-ax cables from the dish to the distribution point and then 3 or 4 co-ax cables to the TV points. Also two cat 5s...

They will all be hidden and will be behind plasterboard or in floor etc.

Can alarm/data/telephone cables touch the electric cables for the ring / lighting etc. Ideally they should not but there will be points where they cross - can they be separated by anything.

Thanks I am fine with the electrics, and wont forget the key pad etc. However I am still unclear about the wiring of the zones. Of these opionw which is correct - a 6 cor cale to each devive, or a six core cable to one decive then to the next etc. If each device has one 6 core cable going...

Pics