Search results

Many thanks both

Anybody out there recommend a decent log cabin/summer house supplier, and any tips or hints on such. Thanks in advance.

The main problems were the end of the actual tape would sometimes split. You are required to punch a small hole in the end, to allow the insert tool to push the tape into the gap. Basically some of the gaps were a little smaller than others, resulting in more friction, hence the occasional...

hi paul, No I installed them.

Hi hammondo, Not in the mind no, I wasn’t kidding myself. There was a difference that you could feel. I hammered the company down on price when I purchased, they come down from well over £500 to start with to a final cost of £300, for approx. 12m2. May the SNORE be with you, hence...

Hello Yes they do retain some heat, but not much. I noticed a difference in the winter. I have a double rad in my conservatory. They are excellent at keeping the heat out, really cooling things down. Time consuming to fit, but worth it.

LIMITS

Thanks Scarletrose21 Just notified by e-mail today re your message?

Hey Dude, looking good. We spoke a few weeks back re the towel holder.

Hi there. The chrome trap worked and sealed well, but the actual pop up waste didn't seal too well. Had to remove and reseal. The basin is b&q, but can't recall the toilet brand. Its a short projection model from plumbworld online. Thanks for comments.

Hi dude, thanks. Towel holder from the next directory. Its ideal dimension wise. By the way its darth because of my sleeping habits, may the SNORE be with you! Allegedly! What part of newcastle you from? I'm wallsend.

Hope you can see photos? http://s180.photobucket.com/albums/x40/DARTHVADER03/?action=view&current=P1000893.jpg Many thanks to all of those people who took the trouble to respond to my questions during my recent second shower/en suite. I did a ground floor full bathroom, finished end...

thanks for that. My MK developed same fault as the post in the link i.e a crack. Its been replaced with a cheapo brand some time ago, and this has failed too (not cracked, just failed) MK advised me that their warranty is void when used with electric toothbrushes. Can anyone recommend an...

Hi all and happy new year, Can anybody please advise if shaver sockets (bathroom) can be used continuously to charge an electric toothbrush?

Thanks for that. Thats something I had thought about, but any suggestions how to get the wire in the terminal block. The 10mm just fits on its own as it is.

Hi, No brass links with the hob unfortunately. Its been wired with one live to terminal marked no. 1, one neutral to terminal marked 4, and one earth to pe (ground symbol) The brass links would make sense, if there were any!

Thanks for reply diyisfun. The circuit for the hob is from a dedicated mcb, cant recall the size, think it may be 45amp? This feeds to a two pole 50 amp switch which feeds the 3300 watt cooker and the hob (6600watt). All cables are 10mm in size, and the run is very small, around 5 metres max...

Thanks for reply. We have 10mm cable feeding in. Can you advise what no. terminals link together? Can we use smaller cable fed from a junction box perhaps.

Hi all, Have just wired the following hob, see link below, and only two of the four elements are working, and ideas? have used the 1N connection method as show in the link below under 'installing the hob'...

Thanks for that seco. Mira supply an olive and nut with the shower, for the purpose of, so I will stick with that. I was just fishing really to see if the tap connector would also do the job.