Search results

Mix and match not always the end of the world. A lot say not interoperable and they end up interoparting fine.

Just leave the interlink off. Before swapping it over turn off the power to the smoke at the board otherwise your playing with 240v. The orders irrelevant.

Code A, B, C, D Yes I’m not at a panel just now but don’t you get the intermittent beeps whilst it’s arming with please wait on the LCD then the intermittent or continuous dependant on the exit mode?

I think the OP is referring to the arming beeps Sparky then they are getting the continuous beep If that’s the case the option I’ve gave is the option. You can’t seperate the arming beeps from the countdown

Set the zones exit volume control to 0 for silent, 1 for silent exit but confirmatory beep and 2-7 for the audible beep you mention.

No it’s an option when you are setting up the user account so you should be able to edit the existing user account you have created and change that setting

When you have setup the new user you haven’t enabled flexi set. Change this option to yes.

Perhaps sensible to get the unit looked at and dare I say serviced. Bound to be some fire regulation codes that the insurance companies would love to latch onto to avoid paying out if there was a fire.

Yes the errors can take a bit of digging. Good you are now sorted.

You still haven’t said what the Pyronix cloud is showing ref your panels?

What’s the status of the panel when you login to Pyronix cloud?

:unsure::unsure::LOL:

Being honest, as soon as I read you lost the wife I struggled to work out what the problem is? More so after 51 years?

It’s not really what documentation you should expect from a reputable installer, but rather what you need and whether they can provide it. There’s not a massive ‘market’ for graded alarms in residential properties, more commercial, but there’s certainly nothing wrong with installing a graded...

You might find someone happy to install it for you but there’s no reputable company going to do the install and give you the engineering codes, particularly if they provide you proof of grading as part of the install. Someone may install it and leave you with all default codes to go it alone...

Pyronix will check, yes Out of interest as well as full control on the cloud side of things are you looking to have the same on the actual alarm panel itself or are you happy to leave things per how the installer sets it up?

Yeah end users cost installers £12

…also just thinking you could ask the installer to set it up for you and default new devices to be auto approved so it actually wouldn’t require any intervention from them downstream unless you wanted to play about with individual end users settings.

Accounts are locked to a single cloud account but can be registered from that account to enable it to be added to another. Can’t see why the installer would stop you doing this - they may however say they can’t support you if you want a service contract. Worth knowing installers get...

Engineers code, magnet and sensor off as you say. Don’t bother faffing about with recording the sensor to disable it. Just use some spark table and tape the magnet to the sensor which will make the panel think the loop is closed.