Search results

  1. Untitled

    Untitled

  2. Untitled

    Untitled

  3. Untitled

    Untitled

  4. Christmas Lights

    Christmas Lights

  5. D

    Adaptor For Christmas Lights

    Thanks all I will try and get a photo of the lights later on. Excuse me being thick but what does this mean? Thanks, Daz
  6. D

    Adaptor For Christmas Lights

    Excellent thanks for your response.
  7. D

    Adaptor For Christmas Lights

    My girlfriend has bought some reduced lights at B&Q because they had no adaptor. They were in the reductions with the Christmas lights but are not Christmas themed as they are flower type decorations. This being so she wants to put them up at home. The label on the lights says 4.5Volts...
  8. D

    Recess In A Partition Wall

    Nope, I just want to go the extra mile. I've seen numerous photos where it's been done and it looks very effective.
  9. D

    Recess In A Partition Wall

    Ooops! My apologies! I did indeed completely miss out the bit about adding lighting! I copied the post from a text editor and must have missed the top bit of text! Doh! Yes the plan was to add a light at the top. A low voltage deck light was my plan. This feeds from a transformer. I was...
  10. D

    Recess In A Partition Wall

    Anyone any ideas?
  11. D

    Recess In A Partition Wall

    Which bit did you not understand? (I meant rf remote not fm! Oops!)
  12. D

    Recess In A Partition Wall

    What's the best way to wire these in with a switch? I was thinking of taking a fused spur off my landing plug socket. Can I have the fused spur on the bathroom side under the bath if it's a waterproof outside type socket? I could also then wire in an fm remote to turn them on and off...
  13. D

    Recess In A Partition Wall

    I am redoing my bathroom at the moment and will shortly be installing a shower cubicle. I was hoping to put a recessed shelf in the cubicle. It will be on the wall that seperates the bathroom from the landing and as such is a partition wall of about 100mm thick. My bathroom side currently has...
  14. D

    Plastic Pipe Connection For Radiator

    The manifold that he has created is above floor level. It's in my airing cupboard. Good idea in practise I think but he's used gate valves, which as it now seems are not to be used on mains pressure. I'm not sure the lever ones will fit as the existing manifold is fairly close together so the...
  15. D

    Plastic Pipe Connection For Radiator

    I don't. I was going on the advice from my plumber. I think I should have left the original copper pipe in and just teed off a new supply for my shower. :(
  16. D

    Plastic Pipe Connection For Radiator

    Should it be stop taps such as: http://www.screwfix.com/prods/15440/Plumbing/Pegler-Brassware/Pegler-Stop-Tap-15mm or http://www.screwfix.com/prods/13103/Plumbing/Brassware/Full-Bore-Lever-Ball-Valve-15mm The gate valves currently installed are fairly close together so would I have...
  17. D

    Plastic Pipe Connection For Radiator

    I am now worried as my plumber has installed a manifold system in my airing cupboard using gate valves. There are 5 cold water gate valves fed from the mains cold supply and 4 hot water gate valves fed from the return from my combi boiler. Have these been incorrectly used on a mains pressure...
  18. D

    Plastic Pipe Connection For Radiator

    I am currently redoing my bathroom. All the copper pipe in my bathroom has now been replaced with plastic pipe so there will be no connections at all under the floor board. I can turn on each supply via gate valves all set up in my airing cupboard. I need to move my radiator from the...
  19. D

    Hardie Backer Board Or Plywood Substrate + Homelux Membrane

    OK thanks again! Just one more question (last one I hope :)), what do you recommend to seal the back?
Back
Top