Search results

The cooker connection unit has loosened. The cooker cable is very short. I want to tighten the screws to see if this will stop the flickering. How can I do this safely? Turn off the cooker mains switch will do and then tighten the screws? Thank you

Is it suitable for plastic or just bathtubs?

Hi, There's a small scratch in the plastic above the sink basin. What would be the best way of fixing this? Are there filler kits available and is one filler material better than others? Thanks

The tap in my bathroom looks to be covered in limescale and has been since I moved in. It doesn't look very nice. What is the best way of getting rid of these stains? Also, should I clean/replace the plastic part inside the tap and how would this be done? Thank you

Hi, The water from my hot water tap flows out more quickly and narrower than I would like. I would prefer it to come out with the same flow velocity as the cold water. How do I adjust the flow? Thanks

Thanks for your responses I'm new at diy, do I need an electric screwdriver to use bits?

Its an outdoor light. I want to remove the cover, I've tried a screwdriver but it's the wrong tool. How can I unscrew it? Thanks

.

Ah right good to know. Thanks

It was there when I moved in. What purpose could it have served? Thanks

I would like to remove a bathroom extractor fan from the exterior wall for cleaning. There are these plastic covers on it - what are they called and how are they removed? Thanks

It grows on the walls and even on the shower curtain. I do wipe the floor after showering but it has not improved things.

Yeah it's bad, the mould gets everywhere. I don't know what else I can do about ventilation. I keep the window open and there's an extractor fan. It's a council property and I've told them numerous times but they don't listen. Never had this problem anywhere else I've lived.

I have a mould problem in my shower room. I can wipe it off where it appears but it always comes back. There's mould along the bottom of tiles in the lining. What would be the best way of 1) removing the lining that has the mould infiltration and 2) replacing it? I have some inexpensive...

Looks exactly the same as that. It was tested before I move in and from my experience with these things, I'm pretty sure they always click on a certain fixed number, be it 15C or 19C. Never heard of the click point moving at least not on these traditional style of thermostats. Just annoying...

Where might the supports be and how might they be taken off? Are they screws as well?

The wall thermostat is in the living room. If the wall thermostat clicking point is supposed to charge point with the fluctuating temp of the room, why does it always click on the 18-19C setting regardless of the room temp? The room might be freezing cold with the thermostat set on 16C (room...

Thanks stem I will try the 'Auto' mode. Well right now I have it on 'Cont' on the programmer and 18 degrees on the thermostat. Radiators are all cold despite behind turned all the way on. If I was to turn in up to 20 degrees, I'd hear the click and the system would suddenly burst into action...

I appreciate this is the exact forum for this, but I thought maybe some of you may have experience fitting and removing shower seats. I have one which I don't need that was there when I moved. I began trying to remove the screws with a screwdriver. I managed to get one out but all the others...

The thermostat and programmer are both separate and both Honeywell. The boiler is a Vaillant ecotec plus. I thought that said 'twice' on the programmer but actually the settings are: Cont, Once, Auto and Off. Last night I set it on Once, which also let me set two separate times. I set it for...