Search results

Putting Self adhesive vinyl floor tiles down in the toilet and at the moment we have floorboards down and the vinyl floor tiles just will not stick down proper onto the floorboards . So l intend to put hardboard down and use small nails to hold this down onto the floorboards and put the vinyl...

Starting the tiling tomorrow and would like some advice on prep/marking out the bathroom ready for tiling and where to start. Do l start at the bath wall and work my way round to the side walls or start at the basin/window wall.

Where are these two black wires chaps, and what will this test prove. Thanks for the replys anyway,

There is a clock on the control panel, it has 2 switches for(auto), and over-ride.

tryed the reset button and nothing the c/h light just flashes and goes off. Are you chaps saying it takes 5 mins before the c/h kicks in and the c/h light stops on regardless of weather you use hot water or not. Also like gasguru says could a broken temp control knob spindle cause the...

Anyone got any help and advice for me... Please

Found a isolating valve and filled the system up to 2 bar then closed off. l turn the hot tap on and the boiler lit up and gave hot water but the c/heating does not work. On the boiler panel the c/heating light flashed intermitant, this said on a instuctions label on the panel that it was in...

Sorry my mistake, l've put up aquapanels..

Any ideas what l should be looking for as l've never done this before...

My combination boiler was working fine untill the other day. l turned the water off by the main stopcock to put isolating valves on the hot and cold copper pipes in the bathroom, when l had done this l turned the water back on by the stopcock in the kitchen but since then l have no hot water or...

Richard c. The weber set plus looks good stuff it says for fixing onto low porosity substrates such as power floated concrete or existing ceramic or vinyl tiles and suitable for use in dry and wet conditions Very strong bond strength but no mention of straight onto aqua board. Do you know if...

Richard C., put the aqua boards up and now ready for tiling. l have the aqua tape for the joints and since it's not got adhesive on the stick to boards what is the best way to put on and seal joints. You also mentioned early in the thread to use either BAL Whitestar or BAL Rapidset with Admix...

ok this is what l intend to do and tell me if this is wrong. Where tiles are on the bath wall l am going to put up 6 batons 18mmx38mm horizoncal , l will drill through the tile grout lines into the wall and plug and attach the batons . l will then put up aquapanels to the batons with 32mm...