Search results

So, I have just tried the app again and its now not connecting. Interestingly I have just armed the system and did get a notification on the app but cant connect to site. I have tried to ping the ComWifi and thats working fine. I have also tried Wintex and that is connecting as well (all of...

The response from Texecom is: This suggest the com-Wi-fi is still being dropped off the network. As such when you made the changes to the BT home hub it then stayed on longer. Wintex would not be able to connect when you cannot connect with the App as they both rely on the same connection...

Paul Uszak - Thanks for the response. The Com wifi does have a static IP address . Mine has had 191.168.1.99 from the start and I have made this static on the BT Homehub 5. At the moment the app is working OK and I used 'Net Analyzer Lite' on my iphone to ping the Com Wifi and got a response...

I have installed a Texecom Premier Elite system and its all working fine. I connect to it through the ComWifi unit. I set up the app so that I can receive notifications but every 2 or 3 days the app stops working. I am no longer able to receive notifications or access the keypad through the...

Thanks Secure I Am - my only remaining problem is that the app occasionally fails to connect (the coloured dot in the right hand corner stays magenta). If I go back into the ComWifi unit and set ‘Obtain an IP address automatically’ back to enable and the IP address back to its original value...

Address removed - thanks Bernard

Hi - Well for whatever reason, I was out and about this morning and I seemed to be able to connect to the alarm panel on the mobile network without any problem - so it all works. A couple of very small points: 1. I seem to get double notifications of every event. So when I arm the system...

Hi - yes the App does recieve alerts and alarm activations. You can control the system remotely through the App. I know that Texecom are producing a new App and integration suite known as 'Texecom Connect' and these will be compatible with their Premier Elite Kit.

Thanks for the quick response secureiam. I am only using Wintex on my home wifi network through my main router as I have no reason to use it on the mobile network. The App I have tried on both the home wifi network and the 3G/4G network. Although so far I have only got it working on mobile...

I have installed a Premier Elite system and am using the ComWiFi module for communications. All is working fine and I can connect to the alarm using Wintex over the WiFi network. I have had the app working (although only once over the mobile network), but every so often it just fails to...

Thanks - yes that was the problem the UDL password field was empty - have added it and it's now working :-)

Hi No I was entering the correct password (I added the asterisks so as not to broadcast the password). In the end I had to remove the ComWifi unit from port 1 using the keypad and then adding it back again - all works fine now - I am talking to Texecom support to try and understand why the...

I have just finished installing a Texecom Premier Elite 48 with a ComWifi module. All is working well and I have been using Wintex over the wifi network to set up the various options. Tonight I have been trying to get the IOS App working with no success. I realised that you cant have both...

TTC - yes there is a 3A FCU between the supply and the boiler :)

Hi - yes from the house consumer unit

Thanks for response. Sorry yes its an MCB protecting the circuit. So the easiest way, from a distance point of view, is to run a short piece of 2.5mm T&E from the fused outlet for the boiler. I will run in plastic conduit. Many thanks for your help.

I want to install a second double socket in the garage. The current arrangement in the garage is as follows: Double socket fed from an RCD (B16). From the double socket a spur has been taken (2.5mm T&E) for the supply to a gas boiler. I assume regs wont let me take a further 2.5mm spur...

I have a Worcester he plus 35 with a TR2 stat fitted. As the boiler is in the garage I would like to wire an external timer rather than use the integral timer that is part of the boiler. I know there are timers available for later boilers but is anyone aware of an option for the HE plus...

Thanks for that - I have persevered and the pressure is now at 1.5 bar - so I can continue bleeding the radiators and top up system as required. Thanks for your help.

Thanks for advice. I opened both valves for quite a long time. I could here water flowing but pressure has still not moved. The radiators that needed bleeding did each take about 60 seconds + until I got water from them. Do I need to wait for pump to start working for pressure to rise or...