Search results

Hmm seems I may have posted in the wrong place.

Hi all What would be a fair price per square meter for a porcelain patio? I'm about to get some quotes and need to have some idea of cost beforhand. Nearly forgot to say, it's two patio's 2 x 20 sq meter. Many thanks in advance Andy

Hi cdbe Do you mean like this one? (attached). Will the horizontal pipe still reach it? Andy Thanks for replying (y)

I think that might do it. I'll have another word with the fitter. Thank you Andy

Hi 23vc - The reason for wanting to lower the pipe is to allow the rain to flow into an ACO drain. The tiles are not porous. I could have just the one aco and the back of the house as there is another drain there for the old sink.

Hi All. Our kitchen extension has an outside drain for sink waste. It also drains gutter rain from the extension.We're having a porcelain pation fitted outside of the extension and after digging down for MOT preparation, the drain pipe is now exposed. I'd like this drain lowering but looking at...

Hi all I'm looking at purchasing a Google Nest Thermostat but have a couple of questions if anyone can help. We have Baxi 105 combi boiler with thermostats on each radiator. We don't have a thermostat anywhere else in the house. I useually adjust the overall temperature at the boiler and don't...

Hey OP I'm still wqorking on mine :) I have to say the the top pation area base including the lean mix has been down for 10 months now and it's stil perfect for laying the porcelain tiles. I did protect it over the last winter with plastic sheeting. I've been working on the lower pation base...

Hello all Myself and my Wife are doing a DIY garden landscape which started during the pendemic (what else could you do? :-) We are now working on the patio area right outside the kitchen and have dug down approx 10" so we can lay the hard core and lean mix bed for the porcelain tiles. We had a...

Hi all We have a Bosch SMV40C30GB Serie 2 60cm Fully Integrated that has developed a fault. The cycle starts ok and I can hear the water entering the machine. It seems to do a pre-wash and then stops with about 1/2 inch of water in the bottom. If I reset the machine and close the door, it will...

Got ya

Thanks gas112 I have fitted the diaphragm repair kit on a couple of occassions ovr the years so I'll take a look at that next. Cheers Andy

Just taken a photo of the diverter valve. Just to clarify - the boiler is quiet when the central heating is initially turned on. If the hot tap/shower is run, the boiler gets noisy when they're turned off and the central heating is still on. Hope that makes sense. Andy

ah - thanks Ian Is that fixable by cleaning it or would it require a replacement? Thank you Andy

ok another update - So I just happen to go into the garage (where the boiler is) and was met with a jet of water hitting me in the side of my head (don't laugh). The place was saoking wet. There was a jet of water spraying out from a tiny hole in the pressure gauge pipe. Anyway, I've replaced...

Hi Ian I don't think you need to sign up - you can just close the popup and view the video. Please try and let me know Many Thanks Andy

hydraulic venturi part ordered - fingers crossed

Haven’t inspected the hydraulic venturi yet but here’s a video. The heating had been on for an hour or so before running the hot water tap. This started the noise. So I got the missus to turn on the hot tap for a few seconds and then turn it off again. Take a look. Thank you DP for the message...

Thanks Ian I'll try that later Cheers Andy

Another update. I ran the Central Heating for approx 1 hour and all was silent. The I ran the hot tap for approx 30 seconds. The noise is back, even with the hot tap turned off.