- Joined
- 13 May 2019
- Messages
- 78
- Reaction score
- 5
- Country
Hi all
We have a Bosch SMV40C30GB Serie 2 60cm Fully Integrated that has developed a fault.
The cycle starts ok and I can hear the water entering the machine.
It seems to do a pre-wash and then stops with about 1/2 inch of water in the bottom.
If I reset the machine and close the door, it will empty the water.
I've checked the filter and the impeller blades rotate easily.
I've unplugged it for a couple of hours but still no joy.
Can anyone advise what the next step would be please?
Thank you
Andy
We have a Bosch SMV40C30GB Serie 2 60cm Fully Integrated that has developed a fault.
The cycle starts ok and I can hear the water entering the machine.
It seems to do a pre-wash and then stops with about 1/2 inch of water in the bottom.
If I reset the machine and close the door, it will empty the water.
I've checked the filter and the impeller blades rotate easily.
I've unplugged it for a couple of hours but still no joy.
Can anyone advise what the next step would be please?
Thank you
Andy