Search results

Can someone advise me how to adjust this hinge thanks

it's not a combi just normal boiler with hot what cylinder and tanks in loft

how do you post pictures

I removed the programmer and room thermostat and wired up receiver where programmer was

can any one help wired up a new hive thermostat but heating not coming on i have green light at receiver for for both heating and hot water the boiler fires up but just goes off again I've removed old room thermostat and just taped up wires just any 1 help

I've just wired up hive thermostat but what do i do with the old room thermostat wires

I'm looking to change my microbore pipes to plastic for central heating is it ok tpo this I'm doing 15mm copper from rad but what is best under floor thanks

How do i test what one it is thanks

70c programmer works and it's 2 port valve

can anyone help i have no hot water I've tryed the valve moving little handle but not working i have the water tank in loft

Hi could any one advise me how to fix the condensation on my threshold and drips down onto floor

Got all done thanks for the help

Ok just checking done this right I've taken the wires from fusebox to cooker switch then cooker switch to cooker connection plate also fitted hob into connection plate then will take feed from connection plate to single socket for oven so three sets of wires in connection plate is that right

Ok thanks for the replies will get this sorted in the morning

So I will have 3 boxes so I take the wires from fuse box to cooker switch and socket then feed from there to cooker outlet then feed from there to single socket using 6mm

Ok so I don't need the cooker socket and the double socket in picture and I need to replace with single cooker outlet and a single socket

This is what I had

Yes I have cooker switch with double socket coming off that,10mm,32mcb and hob says max 6kw

Just now I have 45a cooker control unit with socket and a double socket coming off that

I've just fitted new kitchen and looking to fit new oven and hob the oven comes with plug fitted and hob needs wired in, the wires was connected to 45a cooker control unit and a double socket coming off that it was a gas hob fitted aswell what's the best way to get connected up again the wires...