Search results

Code Enter Display will show “status unset” before going to a menu with “10 - setting” Press enter Press A until option 15 is displayed which will show chime Press enter Cycle through the chime zones until you find the relevant one eg 1014 then turn off chine

easy to default it, but it will need all devices reprogramming onto it disabling it isn't too bad go up to bell, remove plastic cover over the PCB and disconnect the battery remove mains (fuse from the spur) open panel and remove battery (just plugs into the board) that'll disable it

So the next question is why? What’s it serving Around 10 houses have them and a few others would have had them Bedroom fireplace? Surely not going to clear enough smoke to make it useable Unless there’s some Edwardian gas heater or ventilation for something

Hi all Working at someone’s house last week and happened to notice the properties out the back had 2 pots on the rear chimney stack I noticed how skinny the rear ones were, more like a very thin tube What’s the likely purpose of this one? I know most likely for an old bedroom fireplace but...

there is no thermostat on the immersion heater, there's a tank stat which looks to connect to the boiler but nothing inside the immersion i have removed the relevant fuse in the fusebox for the immersion until i can find a time to replace it had a proper look in the loft today, the plywood...

hi all recently it transpires my partner had forgot she had turned on the immersion heater, now we have never used this for longer than an hour before unfortunately we went out for the whole day upon returning home i was greeted to water absolutely gushing out the tank overflow from the loft...

not a chance i'm afraid, absolutely hate combi's!

Hi all I’m seeking a lid for my cold water storage tank It’s a 40 gallon tank I have attached an image of the tank model and the current non idea areangement Thanks

backup battery has died replace the battery is my first suggestion, 12v 2.3ah will fit and be fine for most systems using the Veritas panel first things first though, remove the mains from the panel using the fused spur, remove the backup battery inside the control panel (larger white plastic...

A to hold off + B to trig - C to rtn- D to hold off - S to stb -

of course, it's an absolutely lovely car that's been quite reliable and a good bit different to the rest

just an update, i fitted a replacement alternator (what a job!) but problem is all sorted, charging at a strong 14.8v and all functions working well

nope everything is cool, no signs of shorts i had issues with the cassette radio cutting out whilst indicating the other day, and the wipers going slow so i suspect this explains that

headlights are dim and the battery is at 12.1v running so yeah it's not charging replacement looks awkward, it seems i'll need to take the hydrualic pump off

wiring looks fine, from what i can see everything else works correctly and the battery is relatively new and a good brand it cranks fine, i suppose it could well be the original alternator.....done well if it is

always joyous to have car problems battery light sometimes not illuminating when ignition is turned on as shown in the image below however it's started to illuminate again i note the battery light was lit dimly when the engine was running, and now it's lit solid not charging either, car does...

put a link between TR and 0v and report back, that'll like out the bell tamper and then you should be able to reset with the installer code

Sorted it, defective tag I believe Learned a new one, all working fine now

there is only 1 area set up which is area A they're getting on in age, live in a bungalow and have many toilet trips/letting dog out at night so no need for anything other than a full set (used daily) 24 zones in total, all in use, glass break detectors in most rooms on 24hr alarm, PIRs and...

i must admit i just hit yes for everything, only needs to set A so doesn't need flexi set etc turned on