Search results

  1. L

    Ridges from whacker plate (artificial grass install)

    Thanks for replies, I’ll go over it a bit more. Do you think I should sprinkle some sand/grano dust into the “boney” areas first?
  2. L

    Ridges from whacker plate (artificial grass install)

    Hi I’m trying to install artificial grass myself and at the stage of compacting the type 1. I’ve never used type 1, or a compactor before. I’m finding I’m getting ridges with every pass of the whacker plate, particularly when trying to turn (which isn’t easy in the tight corners). Am I missing...
  3. L

    MOT Type 1 on top of gravel

    Thanks I’ll try and mix the stones into the type 1. Part of the area is covered in grass so once I’ve dug that out I’ll need some type 1 to build it back up so can’t really just use sharp sand as would be too thick a layer I think
  4. L

    MOT Type 1 on top of gravel

    Hi I am clearing an area prior to laying artificial grass. Much of the area is covered in gravel/chips. Can I lay the mot type on on top of a thin layer of this before I compact it down? I’ve ran out of space in my skip for the rest of the chips so thought this would save me hiring another one...
  5. L

    Product for small patch in roughcast?

    Hi I’m wondering if there is a product you can buy in small tubs to do small repairs to pebbledash? Keen to get it filled as it looks a bit worse than it did before winter! It’s a white colour I need, picture attached…
  6. L

    Tips for adding screws to chipboard floor

    Thanks that would be my preferred method as don’t really want lots of holes in the floor, but just paranoid about pipes & wires. Hopefully once I lift the carpet, where the pipes are will be marked like on that picture from inside the cupboard
  7. L

    Tips for adding screws to chipboard floor

    We have been in our house 18 months and the creaky floors are starting to drive me mad, so I thought I would have a go at fixing it. It’s all chipboard flooring which looks like it has been nailed down. I intend to drive some spax screws in to see if this helps. I’ll do a test in the hall first...
  8. L

    Threshold question

    Thanks I won’t be going right through as if I do change the other rooms it would be a carpet in one and tiles in the other. I really was just trying to figure out if I need to remove the wooden bits in the doorways at the moment or if not how finish the wooden floor up to them, and if it would...
  9. L

    Threshold question

    I am looking to lay wooden or laminate flooring in our entrance hall (green carpet below). What’s puzzling me is the house has wooden threshold strips built in to each doorway as you see in picture. If i lay the wooden floor up to these, would i need a threshold strip on to these? Would that...
  10. L

    Small wall build

    Having dug down and levelled off my garden last summer, I’m away to start trying to build a small garden wall, which will then be topped with slabs. Just a query regarding mortar, pointing. Should I just point this as I’m going or build it all and point afterwards?
  11. L

    Sleeper screws from front or back

    If done from the front that is
  12. L

    Sleeper screws from front or back

    You would surely see small holes if not the head to the bolt bit?
  13. L

    Sleeper screws from front or back

    Hi I am building a small sleeper retaining wall/flower bed, 2 sleepers high. I have the posts in place in ground but trying to decide whether to screw the sleeper from the front into the posts, or from behind so the screw heads are hidden. It’s timber lock screws. From the front is probably...
  14. L

    What fixings to use?

    Thanks for the replies, I got the metal anchors like suggested and has worked well. Hopefully the cabinet will still be up in the morning!
  15. L

    What fixings to use?

    I need to fit a new mirrored cabinet to bathroom wall. Walls are plasterboard, cabinet weighs about 13kg. Has 4 fitting points, one in each corner. What plugs/fixings would you recommend? The reviews of all seem mixed so would be good to know what people have successfully used! Thanks
  16. L

    Changing radiator to towel radiator query

    Thanks for your reponce Could a set up like this not be achieved? https://bhs-homeimprovements.com/all-products/eastbrook-dual-fuel-elbow-valve-in-chrome/?gclid=EAIaIQobChMIu5S1kob2gwMVJ49QBh0kBAWCEAQYCSABEgLnqfD_BwE
  17. L

    Changing radiator to towel radiator query

    Hi I have probably a stupid question I want to change a radiator in bathroom to a towel radiator. The radiator itself is currently 600mm wide. But where the pipes come through floor to the valves are 670mm apart. Is it a 600 wide towel radiator I need and some valves? Is it easy to fit a...
  18. L

    Curtain or screen for Bath/shower below window (Ed.)

    Hi I’m looking for some advice on how to deal with a window which is beside a bath. There is a shower above the bath which i want to be able to use. I need to fit a screen or curtain for the normal side to stop splashing into the room. But on the wall side there is a wooden window which I also...
  19. L

    Electric Shower replacement

    Thanks for your advice. How can I tell what kW the current t60si is? It was in the house when we moved in so not sure
  20. L

    Electric Shower replacement

    Pic of current one
Back
Top