Search results

Vaillant a good option but they have a lousy after sales service, at least, compared with WB

That's a good idea but the WB 12i can take 15m gas feed, don't think there are that many boilers 12kw, most seem to start at 15, then possibly have to upgrade piping to 22m.

Sorry, bad pic, the old boiler is about 15" above kitchen worktop, the new one would be just a few inches from worktop

Thanks, boiler in kitchen 2nd floor up, outside pic top flat, I get your point about keep prices low, profits high, they were also charging for scaffolding but then not bothering to cut a new flue hole

ok, had national co. in to give a quote for boiler replacement, not BG, Old boiler, Spacesaver 38 mk1(vented) with square balanced flue on outside wall. looking at Worcester system 12. I asked the surveyor if they would drill a new hole for the flue and he said , no, just adjust existing flue...

Thanks, sorry wrong forum

Centre ceiling spotlight , 3 spots on fitting, says max 35w. each bulb. I assume that it's ok to use LED 4.5w equivalent to 50w? Thanks

Thanks. There is also this simpler looking one without a connector and no earth when would u yes that kind, just out of interest?

Just an update, I have decided to get rid of the transformers and change to gu10, as was suggested, would this gu10 connector be ok in a suspended ceiling or is there a better option, thanks

Thanks for all your comments, will give it a go with what I have , if it doesn't work out will change to GU10

Thanks ericmark for all your info, lights in suspended ceiling, cable prob less than 1 mtr transformer to lamp

I understand what u r saying, just trying to keep simple without changing everything. There r 2 black transformers and 2 white , so I reckon I'll ditch the 2 black ones and then re wire slightly to have 2 lamps off each white transformer

There is a transformer for each fitting, led bulb 8w Winston , so the black one is 20-60w and looks like white one 10- 60w?

Thanks for replies , point taken about changing to 240v Halogen and LEDs both 50w or equivalent

There are six spotlights in kitchen ceiling and looks like 2 different transformers have been used the white transformer makes the bulb a lot brighter than the black transformer , on the led that is, any idea why, thanks

Harry. I am thinking about going to led, when getting a new connector , as u know only about 5w then, there are 4 lights on the track so will be about 20w instead of 200w Thanks

What does that missing bit of silver do, I presume part of the circuit but not sure how,,?

Thanks, thought it might be the built in transformer but obviously the connector will be the cheaper option

I had to replace a 50w bulb in a 12v spotlight track fitting, after replacing the light still didn't work and I noticed that part of the silver/metal covering on the connector is missing, as shown in image, could this be the reason, thanks

Is it worth cleaning the sensors first , that would seem the easiest thing for me to do myself . Not heard of the reluctor rings, how do u get to them. I think that the sensor screws into the wheel hub? Thanks again