Search results

The plant will most likely be a budleah (sp). I have had to take these out and my record is sixty feet of root. Get ist out as soon as pos.

Have to agree with Paul there. I fitted loads of Vokers back then as they had the best hot water and they were easily maintained. I am fairly sure that spares are available for their whole range.

Go through the freeholder's agent. She has to abide by the terms of her lease. If you all jointly own the freehold then the same applies. It is normally a condition of the lease to allow reasonable access for works. Had this last year and the other leaseholder had to back down. In the matter of...

Nah he has the serial number and repos are onlyn interested in making the place safe. If the crutch is in line with the pipe then it is on. If accross then closed. Check it isn't off inside too.

You can try gap filling solvent cement but you may well have to start again.

No big difference in price to buy but maybe he realised that he couldn't get enough gas to it.

They nhave to replace upto their stoptap. If that is in your house then they have to replace that to.

I am supplying and fitting a 28i junior tomorrow. It will cost the client £1,800.00. No powerflush needed and a straight swap. Your mother will only benefit if she is changing from a cylinder to a combi and then only if her bills are quite large. Of course if her current boiler is beyond...

There is a sequence of fault finding checks that we follow which helps us do a differential diagnosis. This varies from boiler to boiler. You are asking a lot with a small amount of information.

I am afraid that you are asking a lot. I cannot tell you from your drawings exactly how your mixer is built. I assume that there would be an "O" ring seal between the water body and the surface but, unless I took the thing apart, I couldn't tell you where it would be. I'd have had to chuck out...

If you think about it, how can you best get the heat to the whole room? The best answr is of course underfloor but then you may not have that option. Spreading your heat sources around the room must be a next best the mustn't it?

I love lifetime guaruntees. :lol:

Well the boiler should be disconnected already. I take it that the gas has already been cut off to it. If it has just take the whole lot out boiler and all. If not then get a gas fitter to cap it off and then you can drag the rest out.

The reason your HEX was knackered was because the diverter wasn't doing its job. Water was constantly running through both the heat exchager and the heating system.

Swapping out an Ariston fpr a WB next week. Won't be power flushing. I'll chuck some chem in and give it a good swill but that'll do it. Unless of course it is full of sh*te.

Should have a spacing jack then.

You should have as many brackets as there are mountings on the back of the radiator. Nothing is ever fixed by the pipes.

If you have installed the rest of the system properly then you already have a functional PRV and don't need another one.

Correct.

Is it still connected to the gas suppy? If not then screed over it by all means. If it is still connected then you should protect it though the chances are that is isn't protected anywhere else if it is old. Paint it over with some bituminious paint and cover it. Can't go wrong then.