Search results

you are all ready quite a bit into cup and split territory with 9" boards in general you are better with ex 6/7 or 8" as shrinkage will become a greater problem as you cant get boards tight enough to stop gaps and in general round here the cost per extra inch in width doubles between 8 and 9...

its worth pointing out only new "dumb" items will revert to 0.5w when off anything with internet or ariel connectivity can use up to perhaps 10w possibly more when recording content or looking for content or connectivity even when no known demands or conexion or recording is required this can...

no expert at all but iff i tackled this it would be a large X i would cut with 4 flaps ---and not cut a section out i assume for a patch you will line the edge with a material of great strength but minimum bulk to not raise the edge plus match up the lay off the fibres

yes 2 are fine take note off services as you go screws normally 2.5 times the board thickness so 55-60mm as an aside 119 txg will be around 111mm coverage as it includes the Tongue

sugars and fats attracts energy far more than water in a microwave tried an experiment to boil a cup off water plastic kettle 2200w and 900w micro boil time about 30% longer but as the micro was about 1700w input kettle gets it but only iff it can boil only a single cup

i remember years ago tony blair was horrified that you could not book a same day appointment easily and all would change -----it did for a bit and you could get an appointment to be seen the same day but as the system couldn't cope so further steps added meant yes you would get an appointment...

yes indeed its part off the story but its just another variable in what can go wrong in life in different ways when you choose a method where the normal methods off recovering the situation may not exist its just another point to note that can go wrong but as i say all part off the risk profile...

look up "kitchen cupboard mending plates " https://duckduckgo.com/?t=ffab&q=kitchen+cabinet+mendin+plates&atb=v227-1&ia=images&iax=images

stories like this have no real value other than the old saying off "don't put all your eggs in one basket " or "dont invest what you cant afford too loose" i wont include "a fool and his money are soon parted" as some will gain as its a bit better than a pyramid scheme its all about maximum...

general comments live tv comes off the aerial anything else comes off the internet so perhaps try live tv before a retune because when you retune you automatically get live tv now i might be miles out but iff live tv still works its not an aerial problem

Exactly my thoughts about who owns the land it grows on so whose hedge it is also you need to check for any restrictions or covenants whilst hedges are seldom micromanaged as plants they can be specifically covered in a covenant for example "no plant or dividing/demarcation boundary structure...

we need to remember we had a reasonable buffer off gas storage available to iron out the extremes off gas prices but was decided to be un needed and a waste off money some years ago ---how we now suffer in the modern "just in time " world where common sense say the the extra buffer in the long...

its worth pointing out price is just one factor with adapters about 8 years ago i bought what i thought was a genuine dewalt to dewalt to allow the old plug in with a pillar to slide on batteries on recipe found it had Chinese stickers on it so not genuine but worked ok buuuuutttt it had...

and dont plan simply to go under and tight to the tread wedge as it tapers

if its a concrete floor it will be pretty bomb proof and as long as you have say 50mm off the string solidly on the floor my main concern would be creaking rather than failure as only the end off the string will compress and move at all rather than interaction between floor and string giving to...

if you draw a strait line from the bottom off the string, it finishes about the red line so you need the extra bit to support the string edge beyond the red line thats why its there assuming the newel post doesn't extend to the floor to take the weight you will need to support the string with...

ok old thread never done gluttony so little but often never done heavy manual so more sustenance now over 70 so get up around 9.45 a rasher off bacon and a mixed egg in a bread roll about 10.45 healthy grill/micro around 15.00 around 350-400g pie/fish/slice new spuds mushy peas alternate day...

indeed the buisness model is closed shop as in cbs powertools Peterborough as ryobi direct https://www.direct-powertools.co.uk/ and direct from ryobi eu https://uk.ryobitools.eu/technologies/one/ no other sources so no real competition

in general not adverse to adapters and cheap Chinese fittings for the obscure stuff seldom used and give flexibility that may be seldom used at this moment off time all my knock offs are for the dewalt batteries as in work/area lights 18v to 230v 200w adapters the main reason i dont have any...

the golden colour will be the added dye to say its been pressure treated so suspect will just leach out in a year or so now will any treatment stop it leaching i simply dont know??