Search results

orginally the copper tank was mains fed with a pressure reducing valve. replaced copper tank changed layout to be fed from the loft tank now no pressure through taps. is ther a airlock? was it mains fed because of poor pressure? the tank filled up andso did the lof tank

Replaced a leaking copper tank. Went upstairs in the loft mains water is bypassed to direct feed with pressure reducing valve and the vent is capped. The new tank started to balloon. Revert to as it shud incapped the vent and direct feed to the tank. Now no pressure through hot taps. I...

Replaced a leaking copper tank. Went upstairs in the loft mains water is bypassed to direct feed with pressure reducing valve and the vent is capped. The new tank started to balloon. Revert to as it shud incapped the vent and direct feed to the tank. Now no pressure through hot taps. I...

Needs some advise please. Just renovated a house and left all the coax satelite cables in the loft. My question is do i take all the cables direct to the LNB (quad) or is there a switch i can buy 4 in and 1 out to the sattelite?? Or any additional gadgets i need for the install. Freeview only

We have rewired 18 bedroom conversion. We have installed a Landlord circuit which is a long coridor. The bank of lights are with sensors. ie every door you open the lights come on some sensor as 3 lights, some 6 and so on. Total sensor are about 6 I hope that makes sense. Now what i would like...

Thanx Notch No mention of disabled access on building regs drawings Also would it not been picked up planning during the process

A Friend of mine who is a building contractor built 2 identical houses via aproved inspectors. Many different inspectors (due to leaving) visited the property through the build. Cut the story short the second to last inspector made final visit and advised a hand rail and other minor things...

I have 2 shutters One is entrance to the garden with the NVR is inside the utility room. The 2nd shutter separates car porch and rear yard. NvR is in a waterproof inclosure box side of the shutter. You can have the Nvr anywhere considering the getting a good signal from the remote fob

I require some urgent help please we have just rewired HMO property over 3 storeys ground floor, first floor and the loft. We have installed to building regulations i.e. smokes in each area with emergency lighting. the property now all finished i.e. plastered and painted with just the carpet...

Require some advice New water 63mm supply to a 18 flats Require a manifold to distribute to each flat Prices for 6 way manifold are about £400 each so need 3 thats over £1200 and rest of the fittings. Is ther a cheaper option we can create or make etc

Thank u so.much for the advise

Ther arr 3 rollers shutter on 3 x 3phase mcbs and 2 wall sockets 3 phase

Some advice please. A warehouse has a new distribution board fitted. Very nice all schneider breakers and board. 3 Rcbos single phase breakers but the 3 phase breakers are just MCBs Shud they be RCBOs?? Not mentioned any observations on the the EIC

D Sorry yes yur correct incorrect info Tot 5 flats each appliances in each flat

Orginal post it states 5 flats off one 100amp supply so all appliances x 5

Hi aptsys For future reference how to do u calculate the max load?

Hi need some advise please Attended property to re wire 5 flats. The flats has electric only single phase 100amp fuse. Now the owner wants in each flats 5 of each 8.5kw shower x 5 5.5kw water heater x 5 2 kw wall heaters x 10 plus 3 kw hob x 5 Thats over 100kw from each flat an thats not...

Im waiting for a callback from Openreach landlord department and see what they say

Spoke to virginmedia construction. They advised to run rg11 to each flat from the meter room in the basement. Just 1 RG11 in each flat, telehone will come from the unit in the flat

Ah so if the service proviser installs modems.in the meter room than cat 5/6 to each flat?? What is all in on modem/ wifi router that will be situated in the flats so what cable for that? Thanks