Search results

Lol Thanx wessex To be honest i dont want to advise my freind to go and rattle the councils cage. Just carry on as it is?

Much appreciated Woody

Thanx Woody It was only a 1 application and only condition was a noise impact assessment which was discharged in 2013 within the 3 yrs lapse period So to be clear can the complete the works and open as a approved business??

Need some advice please A friend of mine applied for hot food takeaway and new shop front Application was granted in 2010 new shop front was fitted on 2011 and minor works started internally then the works stopped due to depleted finances and the other personal issues. The premises as been the...

I Hope this is the correct thread for this topic. also posted on another trade Iv had my floor screeded by a incompetent tradesman. he mixed sand and cement on site either its not mixed properly or hes put too much sand in. now its all dried and very sandy and dusty. every time you brush up u...

I Hope this is the correct thread for this topic Iv had my floor screeded by a incompetent tradesman. he mixed sand and cement on site either its not mixed properly or hes put too much sand in. now its all dried and very sandy and dusty. every time you brush up u brushing up loads of sand...

model no SV7702 Was giving out cold water so replaced cartridge still same issue Is ther any el se i can look at or missed anything to why its giving cold water?

Not rcd. Its the 32amp MCB

Its on a plug and socket JohnD Sorry cant provide a photo unless i make a trip again to the house. It was already wired in. Newly updated house

Model is Beko BNIC22100X Newly wired property. No oven b4. Originally the RCD was tripping after 3 to 4 mins. Tried plugging on a different circuit with a extension still tripped the RCD. After plugging back to the original circuit the MCB started tripping instantly. Cant rember the readings...

Brand new oven on a ring circuit plugged in tripping MCB. Checked all wiring all ok. On the oven getting continuity on the live and neutral terminals. Suprising on a new oven. Any other check i cn do b4 i ring the manufacurers Thanx

The shower has 3 settings low, medium and high. Only trips MCB after about 3mins on high setting

Check voltage and loose connections all good

please can anyone shed some light on this before i replace the shower Mira electric shower works fine on low and medium pessure but on high pressure it trips the 40amp MCB afrer about 3 to 4 minutes (not the RCB). Any ideas please

hi I have cream leather in my car. I left my widow open and the door leather got stained. (Yallowy stain). Had a professional valet cud not remove the stain. Is ther anythin out ther or any tips i can clean this without damagin the leather??

Update Put a clamp meter on drawing 6amps and triped after 15mins

i wonder if anyone can help with intermittent tripping problem Distribution board 20amp MCB feeds a 20amp contactor to the outside sensor for external lights and bollards lights. Another small consumer unit wired in a way from the disi board and the contactor when the sensor turns the lights on...

Soory for late reply Please see pics of shutter closed

Thats where is stops will no open any further

Please have a lool at the photos from the outside