Search results

Can someone advise what type of pull cord switch I need to replace this on the left please? It is for the extractor fan in our bathroom (no light, just the extractor) and intermittently doesn't work. I bought this 10amp pull cord switch, but now see it has different wiring (only L1, L2, Com)...

We have an old style Scantronic 9448+ burglar alarm with 2 entry and 2 PIR. Some of the buttons are no longer responsive - I have tried removing and cleaning the control button pad as suggested on another thread on here, which improved the performance briefly, but now cannot be relied on. We...

We have bought a replacement built under oven Kenwood KBUDOX21. One online site says it is "plug and play" install, others that it needs hard wiring to a dedicated cooker circuit/switch. We have a red switch in the kitchen (pictured) and a separate circuit breaker on the consumer unit. I have...

Good morning, I hope someone can advise. Our Delonghi EC146.B has started leaking. I took the top plastic cover off to investigate and note the rust. When switched on, water is coming out at the point circled in red. As it is a nut shape, I assume this may come off and have some form of...

I am hoping someone can advise please. We have a Potterton EP2002 programmer/timer and the slider keeps falling off, so it looks like we will have to replace the unit. We only use the slider, as when they fitted the new boiler it blocked the programmer in (see photos). I understand that the...

I hope someone can help please. We have a Viessman Vitodens 100W conventional boiler, 5 and a half years old. We have no hot water and the boiler is not firing up. There are no warning messages on the boiler (and it fires up and runs through the tests when power is switched on to it). I...

We have a Scantronic 9448+ original alarm that It has not been serviced at all in 15+ years, as it has worked fine up to now. The keypad has started to be difficult on certain numbers, so I changed the code. However, it is still not always responding to the code (it beeps when numbers are...

We have a system/conventional boiler (Viessmann Vitedens 100W) with a feeder tank in the loft. A leaking radiator valve upstairs was changed, which involved draining quite a bit of water from the system. After fitting the valve, the engineer refilled the system and mentioned we may need to...

I hope someone can help please. We have a Viessman Vitodens 100W conventional boiler, just over 3 years old. It is controlled by a Salus RT310i thermostat that also works with an app. This past few days, the red and green lights on the Receiver are on (solid) when on Auto, but the heating is...

I wonder if you can help. We have had our shower fitted for the past 7 years without incident. This morning my DLW decided the shower was not hot enough and turned the temperature up, which for some reason tripped out the electricity. When we switched the electricity back on, the shower...