Search results

Joists are about 25-30 mm from the top of the board.

These are the fasteners https://www.dinodecking.co.uk/products/6mm-hidden-fasteners-100-bag/

It’s using decking fasteners The T shape ones with the screw through, it’s the same on that keeps coming loose. Decking is a few months old, I’ve re screwed it 4 times now so no holes on the joist left. Tried wood filler etc but can’t get it deep enough into the whole. Tried a dowel but with...

I need to re screw the decking fastener

Hi, I’ve got a joist which has taken too many screw holes now. Whats the best way to fill them without taking the board off? Or is it a case of replace the part of the joist?

Is it his first day on the job or something?

This is what I did Coated with a clear wood preserver (Rustins) Mould still appearing I sanded it all down added two coats of wood preserver (Cuprinol) Mould seems to be worse now after all the rain. Not sure if it’s just on the surface and the preserver is doing it’s job. So have wiped...

Yeah it dries really well. Just annoying if you have small touch ups to do that you can’t after a few hours

Yeah I did two coats on my railings but need to do some touch ups now that I didn’t notice when I finished.

yes

Anyone had experience of this paint? Need to do a few touch up of areas I missed. But paint is running off now. Seen people say to sand or wipe with white spirit to form a key? Any ideas?

Just wondered if anyone had used this product? I need to apply some touch ups on areas I missed. How can I get the paint to stick? It seems to run off atm

Had some wood trim fitted to my fence Used Rustins shed and fence clear over the top to protect. However, I can still see some mould growth. Any advice on removing the mould? Sanding? Painting over the top?

I’ve just checked my test piece now which was only covered about 2-4 hours ago and that’s dry, no stick. It was a rougher piece so possibly absorbed faster.

Ok I’ve only used it on my fence trim thankfully. I’ll give it a few more days as the drying times I’ve seen do vary from 16 hours to 5 days!

I just tried sanding a small patch to see and it gummed up the paper. Want to avoid jet washing as it’s the fence that surrounds my composite deck and don’t want any residues staining etc

Someone had used the shed and fence clear but wasn’t happy so used a preservative on top.

How would I get that off now then the sticky residue?

I read reviews where people had used preservatives on top of this.

That’s the one I used this time This is what was previously used? https://www.toolstation.com/rustins-quick-dry-shed-fence-clear-protector/p18602