Search results

Thanks guys.

Because ultimately I don't want the surge or switch anyway. Also the one you linked to is substantially more expensive!

I'm thinking about buying one of these: It looks to me like I could remove the surge and switch modules and replace them with a further two grid sockets like this: Does anybody know if I'm correct? TIA

That's what I'm looking for! Thanks Sam.

Thanks chaps, Sam, my issue is that grid decombiners take up 2 gangs of the grid plate. I think I will have to adopt the suck it and see approach. Ta again.

Hi Guys, I'm planning to install a DAB aerial via a UHF/DAB diplexer, due to the current outlet being a grid jobbie with all four positions already occupied, I'm trying to find an in-line decombiner (but struggling)! are there any issues with not decombining the signals at the room end & just...

One of those little velour cases with a burning piece of charcoal inside? Available on amazon.

Yes.

I wondered why he had disassembled the cut out, but I thought afterwards that perhaps he popped the service fuse as a result of his meddling.

This may interest some of you guys: http://www.channel5.com/shows/police-interceptors/episodes/episode-8-498 The piece starts at about 14mins & the exhibit is soon after 16min 30secs. Two things grabbed me - one quite ingenious, the other a bit crazy. See what you think.

Fish tank?

Yes, if the back box is metal there should be a grommet at each cable entry.

Do I spy a missing grommet on the right side cable entry to the back box?

You need to install the relay of the time switch in to the switched live from the photocell. This avoids the warm up period during daylight hours. :mrgreen:

I would say they are case-bearing moths: https://en.wikipedia.org/wiki/Tinea_pellionella Carpet moths are different: https://en.wikipedia.org/wiki/Trichophaga_tapetzella The seed like things are the pupal skins. Treatment is similar though. I have the damn things too!

That is freakin' excellent!

I would have thought if the valve has failed open, disconnecting the electrics plug from the valve would have no effect. You will need to replace the valve or bypass it I think.

I think you can achieve that by joining the two hoses together that come from the engine at the heater valve in the bulkhead - that should bypass the heater matrix inside the car completely.

Just a quick follow up on this. Finally managed to get round to looking at this again. Popped a new plug in and she roared into life in a huge cloud of smoke on the first pull. Many thanks for your assistance.

Hi john, thanks for taking the time to respond. The diaphragm was indeed a genuine one. I don't think it was flooded, certainly not to begin with - I pulled the thing until my arm nearly popped out of its socket! The plug did look a bit sooty and damp, I also thought the gap looked a little...