Search results

livingroom ceiling fell down because of leaking fitting :( Hand tight compression fitting :)

as far as i know, if there is a new certification that you require for your EMPLOYMENT then the cost shoud be fronted by your company, - however many of them make you sign stuff to say if you leave you will pay back a percentage etc etc.

very helpfull , but im not at the stage of worring about the vat man, ( it is a homer afterall) :)

is this question because its coming out at a 45deg angle? ie water sittingon the top edge of the flue against the wall ? if so cant you seal the void with silicon or somthing? before cementing?is there a reg for this?

how much is reasonalble to ask up front?

:lol:

oh and i hope this isnt a silly question, until now i have previously bought the fittings myself and the cutomers have paid for this over and above the job price. is that right? do u ask for anything up front

no, i did think of that, providine the walls are sound, they will get old adhesive scraped, if the wall deterioates, then it will be sheeted with gyproc- - (should i give an additional quote if i have to do this). like i say it will be 350for swap, and up to 200 gpq if walls require attention, ?

im not, im just sdaying that many people chop and change . go from job to job just to find out they are no better off, i dont think there is the "perfect employer" unless the imployer is yourself :) so thanks for all your words of advice and support ill be fine :) as i said, just had a...

slide phones just dont work dust and crap gets into them mechanism i ive gone through 3 nokia n95' this year

i have been asked to do a homer for a friend of a friend of my Girlfriends family, so lets just say i dont know them.. they want a new bathroom. i have to rip out old bathroom inc wall tiles / replace bath / re-work pipework /redo boxing in of pipework fit new electric shower shower...

thanks for all your advice, - just to clear a few things up.. i do get paid extra for overtime (but you must have done 45 hours pw before you qualify for higher rate - its some overtime rule) i do enjoy my job, and to be honest i am lucky to have been given the chance, Think ive been...

I do everything except the tiling, ( i do all the joinery work also) bit of a kick in the nuts when your making 230 p/w :) - Wonder how much the job quote is for > :) i know i will be in good standing to go out myself when my time is out, but thats little consolation at the moment....

13 months aint a long time. :)

I do agree. to some extent, i do appreciate the chance i have been given i work almost totally unsupervised - what i mean by that is i normally i am the only person on a job, from beginning to end, I Can ask for advice, but thats it. It is a good Company to work for, in the respect that...

I am a 3rd year apprentice plumber working for a very small Ltd Company. and to be honest i feel trapped. I am Contracted to 39 Hours a week i normally work 45 - 50 i know there is "seemingly" no such thing as compulsory overtime but i dont get left with much choice as the "job needs to...

If the connection to the hob is a self closing bayonete connection (normally a flexi black hose, the u CAN remove the gas appliance, as the bayonete connection has a self closing valve, however it is recomended (and good practice) to perform a gas test on the system (and of the top of my head i...

nice one dan, i have thought of this, and know that monument tools make one, with twin steel "prongs" to hold the waste - to be honest i dont have a problem with stopping the trap from spinning, what i am trying to find is another way to tighten/loosen the backnut on the underside of the...

indeed they do.... thing is were talking about the back nut(jam nut) on the basin waste

mabe i should go on dragons den with this one, there MUST be an alternative to the screwdriver and footprint method?