Search results

wall hung and weight wise..............Baxi Ecogen............... it comes with a forklift truck:0

expansion vessel may have failed, if pressure is a above 3bar the pressure relief valve will activate (dribble out of pipe to outside). is pressure below 2bar when cold? if so i would check vessel first.

Need some help guys. My 105e has just started to play up, when i go to bed at night or go to work (dhw and ch off) the boiler fails to light when timed to do so, both the ch and dhw are effected. the boiler is showing a fault at the 60degrees led (poss pump problem says MI's). if i turn...

isnt it a hexagonal nut? you turn (to the left of the in serted key). The pressures droped for a reason, leak, bled radiators etc. so dont stand there filling the system for to long (even if the gauge doesnt start moving) as you maybe flooding your house!

i'll do what i want thanks, haven't had any problems with past properties and electricians. cheers again

did you say something?

havent got an electrician yet, but i'm only buying 'branded' products at mo, its to spread the cost :wink: anyway cheers for reply.

I want to fit a switch above the worktops to isolate a socket (below the worktops). but not sure the type of switch to buy, is a DP 20amp switch the one i need? cheers BTW- (an electrician will be connecting up all my wiring in the kitchen if you wondered)

Thaks again, Danger. bster

anyone know the min distance from air inlet to rw down pipe? for this boiler with plume kit? I'm guessing that it is the same as if it were a standard horizontal flue?

MY MISTAKE! :oops: Just realised that the one part number is an extension. (idiot). sorry to wast your time ppl. eeerr!

I'm not expecting hundreds of replys to this one. Whats the difference between the following black plume kits. Part No: A2044200 and the A2044000. anyway cheers.

ok, cheers. do you/have you fitted these? best price i can find (eBay) is £430 inc Vat and delivery £40 (boiler, standard flue and mechanical clock) do you think i'll get it cheaper at plumbs/pts etc? cheers again.

is that definate, for the 'older' betacoms? thanks for all the advice Dangermoose :D

wanted to check part numbers on flue parts. the boiler will be installed betwwen 670mm gap between a 3storey internal corner and an openable window, so i'm planning on using a plume management and 45's to swing the outlet away from the internal corner and above the window. also need a 1m...

anyone got a link to the mi's for this boiler? (not the new 'c' model)

ok cheers.

Is that 300mm, and does it use the same flue as the flexicom etc then?

Anyone know what the min distance to an internal corner is in the MI's? I take it that this and other budget boilers sont have any plume management options. cheers

right i'm going for this http://cgi.ebay.co.uk/Glow-Worm-Betacom-30-Combi-Condensing-Boiler-Boilers_W0QQitemZ270268117698QQcmdZViewItem?hash=item270268117698&_trkparms=39%3A1%7C66%3A2%7C65%3A7%7C240%3A1318&_trksid=p3286.c0.m14 i'll buy next week so keep the advice coming :wink: