Search results

I use these when i land on a joist. Minimum notching required cant remember the depth but they are tiny

Could you not step your footings?

Im sure on specs for my extension is was 300mm depth by 600mm wide. Building just dug diwn till he found some firm ground, then mass filled them so they ended deeper than the 300mm

Hi, has anybody tiled directly onto the wunda eps foil overlay boards? Anything to watch out for? I know wunda only reccommend kerrabond t mixed with the additive and tilefix proflex s2. Thanks in Advance Norton

Yes. Its a house im doing up and family moving into this summer hopefully.

The bad timber is directly above the extractor thats why its soaking. And yes the ventilation is crap they bricked up right to the felt on the inner skin and put a few token vents through the soffit. Im converting loft so will have to sort this out.

Thanks feel a bit better now. Out of interest wheres the salt from? The moisture from the bathroom?

Ive got the cuprinol 5 star.

Would you scrape off and treat for good measure

Scrape it back and treat? Thats my plan anyway as i have to bolt 150mm timber to the side of existing

Salts on the timber?

The timber feels strong, this was right above an extraction fan that was not ducted to outside.

I would glue them down. Once stud is fixed to the walls either side its going nowhere

Hi all what are your opinions on these photos, wet rot or dry rot? Thanks in advance. Norton

I would put bath down full length of window wall toilet in middle of long wall with basin at the end.

Loads of conservatory radiators i come across are not on a seperate zone, but should be.

Conservatory should be on separate zone but loads that arent.

Get some new feeds from upstairs. Its not a good idea teeing off of 10mm.

Usually screwed through centre of waste.

Common = ls.