Search results

Thanks Muggles I will have a look. Worz

Hi, This is an outline of the corner of my ensuite, it currently has a small 720mm shower tray, with door. I intend to knock down the small wall enclosing the try and then install a 900mm enclosure, either square or quadrant. The Blue lines show the proposed new shower enclosure. Black lines...

Of course i meant amps :oops: There are two fuses, one for each shower, both say 32B on them. Been there for at least 10 years, I am sure the other one is a 9kw. Is this a problem that i need to get looked at? There are a couple of spare 40A fuses I think after the new kitchen was put...

Through a bit of searching it is a Mira Sport (1996-1998) (Sport) http://www.showerspares.com/mira_shower_spares/mira_all/mira_sport_1996-1998_sport/ 8.5kw it has 6mm cable and the fuse is 32w It s the similar size to current models just that pipe is looking like it won't fit new versions...

Hi, A bit of advice please on which electric shower would fit this setup after my very old Mira shower died. A new Mira sport doesn't seem to fit as we have one in the other shower room. Any ideas? [/img] Thanks.

Chaps a couple of questions please. Everything has been fine since the install, however at the weekend i changed the external sounder. All went fine. However. Since then on 2 out of the 3 times i have set the alarm zone 7 which is a door contact has caused the alarm to trigger. First...

Hi again, It looks like it is the valve that is buggered. I managed to get the motor off, it is very awkward and the motor is turning fine, it just seems the valve wont move, i was able to move the man/auto switch, but i think it was just spring pressure, not the valve opening, is there any...

Many thanks, I will see if i can get one and have a go at replacing it. Regards Worz

Thanks for the fast replies. The lever moves fine, but nothing happens. Do you think the motor is most likely faulty?

Hi All, My central heating isn't working, Hot water is fine but the heating doesn't fire the boiler into action. I think i have proved it down the the synchron motor picture attached, i am getting 240v at the motor. But nothing is happening. Makes me think it is a faulty motor. I have a...

Thanks mate, dont know how i missed it. Other bits changed too, so thanks, no doubt i will be back :)

Sparkymarka I have confirmed the devices. The plug on expander and keypad, i didn't change the dip switch on the keypad as i only have 1 keypad so i left them all as off i.e. address 1 I will look into the user code bit tomorrow! Thanks again for all your help!

Cheers Guys. I do have the wrong manual :oops: Its a prem elite ver 2.01 so the green flashing is normal. Unfortunately the relevant installation manual doesn't seem to be available, doh. I dont suppose someone could point me in the right direction for one please? I found one but it...