Search results

cheers how many to a pallet and would you know approx cost in london area cjeers

yep that sounds right thanks mate

thanks blagard it says on the plans 100mm Hardly any cutting to do as its 2.5 x 12 m long outa wall yes i wll allow for waste and cutting on the rt of the build

hi all Building an extention and need to try and work rough costs how many plasmor flborlite blocks i need for an outside wall 30m2 is the size How many roughly would i need and roughly how many to a pallet and cost per pallet asap please and thanks in advance keser

hi bit of advice needed please i m a partner in a firm and have sent one of our employees on a gas safe course, part of the course i need to send him out with a qualified enginner for some experience He needs to sign him off on around 20 jobs but any amount would do at the moment as im not...

hi LONG STORY SHORT Had new heating system and oil feed Worcester Bosch greenstar heatslave boiler ( boiler installed outside back of house) in ireland Problem is in the mornings when heating has not been preset to come on and i turn the tap on (either in kitchen or bathroom) the water...

pics of boiler and water gauge

Gents more revelations, after changing the 2 x zone water and CH VALVES, we put the heating on and all was working fine, suddenly wife says rads are cold after about a hour the reset light came on the boiler ( micron 66ff) This has happened before sometimes and on those occasions when i...

Just to finalise Engineer turned up and changed both hot water and CH Zone Values. Had to drain system ofcourse. fired it up and bled the rads everything is dunky Dorey and working fine. Im covered that god so no big bills to worry about. Thanks to all your replies, this is a helpful site...

Hi ALL, Thanks for your replies, to date called boiler guy out and he has worked out that both Zone values are knackered The one for the hot water is seized up so the hot water was scolding and the one which called for the heat has completely failed. He didnt have these on him so over rode...

anyone around still? :cry:

yep, as i thought after about 5 mins boiler clicked off, pipes are all hot near the boiler, pump working but radiator nearest to it stone cold and normally warms up very quickly! Its got to blocked surely?

up date gents i took the screw out the front of pump and moved the speed indictator on side of pump slightly, pump started and then i done a reset on the boiler it started straight away! i m just going to see wether it clicks off after it gets hot9 which i expect it to) and then i will come...

the pump seemed to be working last night but i cant tell now because i cant fire her up, can i test the pump without the boiler being on?

thanks for your replies Yes the micron has no bar indictators to show pressure and yes i only opened the radiator nearest the boiler which showed good pressure when opened Yes i didn't make myself clear, to get it working again i let everything cool down and then i done reset but it didnt...

i have a glow worm micron 66 ff boiler, it comes on for 5mins and then clicks off, the pump and the surrounding pipes are very hot but radiators are cold The 2 lights ( reset and boiler) remain unlit I have tried to reset but when i turn switch clockwise you can normally here it click and the...

hi, long story short.son at uni, so i have turned his drayton thermostat off on the rad,When we turn the heating on after about an hour the radiator gives out a humming vibration noise so we turn the thermo up and it stops. But it is now humming even when the thermostat is set at a low temp...

Andygasman Yep, you were spot on, magnets are sticking to the T joint area you suggested and also showing signs of attaction to other areas nearby and further down under the pump. We ran the pump on it own and the engineer did point out that that the system had a large...

top man, they are coming back tomorrow so i will dicuss this with him... i will keep you posted Thanks mate

Hi. long story short. glow worm engineer came and replaced a faulty zone motorised valve ( CH was coming on when only HW was being called for) common problem it seems. However after he fitted the new value he said he was unable to refill the the system as there was an apparent blockage in the...