Search results

Amazing thank you guys, I haven’t got round to testing this yet as I’m still waiting for the internal sounder to arrive! Once it does I’ll give this a go. Thank you again for your help!

Ok so this is going to sound like an odd question… at the moment I have one sounder (delta bell wireless). I was going to add a second one in on the basis that it would alert people in the house if something happens. my question is, I have two alarm sets as it were, the first is full set for...

Amazing, thanks sparkymarka, that worked perfectly. The system is running perfectly now so thank you to everyone for your help, it’s really appreciated!

You guys are geniuses. It worked! I now have it set exactly the way I need it! However, new problem, my code for some reason (even though it is assigned to area B and A), won’t disarm the timer when I go downstairs and trigger the PIR. What code is it expecting?

Thanks @Handymanjo - I’ll be finishing this one off tomorrow so will try this all out tomorrow and get the sensors changed around. Appreciate you coming back to me so quick!

So, yes I’m sorry in advance, another question about Pyronix alarms! I’m trying to get my head around zones and sensors, and why they’re not behaving the way I want them to… so I have 4 PIR sensors, 3 in the house, and one in the garage. So I have added all sensors to both areas A and B. 3 of...

Hi Stem, Your advice was spot on! Hive is now up and running perfectly. I’ve attached a few pics of the (mostly) finished job. Just need to do a bit of making good where the old thermostats were but other than that, it’s all good! Thanks again for all your advice and help, it’s very much...

Hi Stem, That’s a massive help seeing it in a diagram. The only thing I can see that I have wrong is the common. I’ll remove it when I get home and link the live to it. If this is all that needs to be done then I look forward to getting it working! I’ll keep this thread updated and let you...

Thanks Stem, I will do that when I get back, so what I have in place is the Live from EPH to hive L, the grey cable to neutral, but the Black cable next to earth, I believe that to be the common cable although I might be wrong, to port 1 on the hive, and the relevant cable on the right to port 3...

Yes that’s correct

Thanks Stem, You have assumed correct on pretty much all points, the reason we are putting the receivers upstairs is because we don’t want both the receiver and thermostat where the previous thermostats were. That being said, there were 3 wires where the thermostats were, however one wire was...

Hi Stem, Apologies, the hives I have are replacing 2 wire (common and n/o) wired Danfoss thermostats, we have a EPH wiring centre in the upstairs closet next to the two valves which is where the two hive receivers are going. The two thermostats which speak to the receivers are going upstairs...

If anyone has any suggestions on what to look for that would be great. Thanks

Ok so to update, the hive is not pushing a call to service, there’s no power coming from pin 3 on the single channel receiver, could this be a fault with the hive? Or is there a setting I need to turn on or off?

hi all, I have a question about hive, so to cut a long story short the boiler isn’t firing up when hive is kicking in. I have it wired so that the hive has the live neutral, connected, the common wire is connected to pin 1 on the hive bracket, and the n/o from the old thermostat is connected...

Thanks for that, so the good news is it’s all wired in now, the bad news is that the boiler won’t fire up.... Everything switches on but I’m getting no call for service to the boiler which is odd as the right cables are there..... anyway I’ll upload photos to show the layout we decided on as...

Amazing, thank you, I will get it drawn up and get the parts later today. I'll keep you all updated on the progress as well just to share what I've done.... Thanks again for all the comments and advice!

I just had another idea, and that is instead of using .75 flex, use 1mm flex wiring, and run 1 set out of the box into another box which I can then split with another terminal block into the two hive receivers, I am assuming that would also work? Thanks

Yeah that's the last thing I need it looking like! Thank you everyone for replying so fast and with so much helpful feedback, I guess I have one more question then... At the top of the block on the left, we have live, neutral, earth, boiler return, if I was to seperate out the live and neutral...

Hi all, I’m new to this so bear with me please! I’m sure the answer is no but I thought I’d ask! A friend has shown me how to wire a hive receiver into a EPH, the reason it’s there is because we have split heating zones. Anyway I can’t get the cables to fit as there’s already too many there...